Maverick GI trouble

Have questions on how to fix your machine or what products to use? This is the place to ask for help.
Post Reply
User avatar
Drumheadz
MAACA Super Contributor
Posts: 457
Joined: Mon Aug 01, 2011 6:38 pm
Location: Gatineau, QC

Maverick GI trouble

Post by Drumheadz »

So I just noticed that all the GI lights are out in the upper part of the playfield.
I started by replacing the connector CN8 on the power supply board with trifurcons because the connector looked burnt,
replaced the header on the board,Checked all the fuses,
reflowed the solder for the GI relay. still no luck...

any ideas on where to go next would be very appreciated.
merci!
Last edited by Drumheadz on Mon Jul 10, 2017 10:34 am, edited 1 time in total.

User avatar
cdnpinballer
MAACA Mega Contributor
Posts: 2725
Joined: Mon Oct 18, 2010 9:48 am
Location: Ottawa, Ontario
Been liked: 3 times

Re: Maverick GI trouble

Post by cdnpinballer »

Check fuse?

User avatar
Drumheadz
MAACA Super Contributor
Posts: 457
Joined: Mon Aug 01, 2011 6:38 pm
Location: Gatineau, QC

Re: Maverick GI trouble

Post by Drumheadz »

cdnpinballer wrote:Check fuse?
oops, forgot to mention, that's the first thing i checked.
thanks Lee

User avatar
cdnpinballer
MAACA Mega Contributor
Posts: 2725
Joined: Mon Oct 18, 2010 9:48 am
Location: Ottawa, Ontario
Been liked: 3 times

Re: Maverick GI trouble

Post by cdnpinballer »

Daisy chain wire on the GI circuit disconnected?

User avatar
Drumheadz
MAACA Super Contributor
Posts: 457
Joined: Mon Aug 01, 2011 6:38 pm
Location: Gatineau, QC

Re: Maverick GI trouble

Post by Drumheadz »

Found the culprit!
seems connector J5 on the PPG board was also burnt

Post Reply