MAACA.org

None..it does not light up, if I press the top one it says 0, and the 2 LEDs light, but bottom I get nothing....

So my Black Knight went dead last night. Played for a bit, was all good. I left it on in attract mode for a few hours, went back and all I had was backbox lights. After checking connectors, I got the gi lights back. The Mpu seems to be booting, getting the quick flash of the 2 LEDs and a 0 that both ...

Im looking for 2 working pop bumper boards for a system 80 Gottlieb. Also looking for the interconnect harness between the mpu and driver board..I need the one with the longer wires..

Edit...plastics found

Looking for a solenoid driver board and slingshot plastics for a Panthera ..Thanks.

Anyone have a Black Knight? Im reassembling one and despite tons of pictures, cannot find where this goes

Edit hopefully an admin can get my picture to show up..keeps erroring out...its also pinball rev...thanks

Thank you ...good video

Thank you !

Apparently its not letting the pictures upload..I get a yellow triangle and server error...is there an email I can send you

Just wondering if anyone can explain this....hoping to put it back to original

Looking for playfield glass locally..im near Smiths falls..

Update ..after hours of looking for shorts etc...I decided to remove one wire at a time from the display connector. The black wire with green stripe was the issue. I removed it and the ghosting stopped. The ball and credit digits seem to be working fine. This display had been redone with a molex ...

Swapped them and nothing ...ill look into u13 thank you !

So I reflowed the header on mpu and also repinned the connector on display.. now working fibe, but still getting bad ghosting digits on other displays when credit display is plugged in. Remove it and all are good. I have tried about 10 good displays and no change, so its not the display...ughhh ..

Yes tried a few others out of my star trek ..no change... checked connector at mpu end ...its a 6803 game eight ball champ ..

So the 6 digit display for credit / match etc has quit ...it started out losing the ball in play digits, then the credit digits ..it does glow in the corner, and other displays are ok, as long as it's unplugged ( was ok before)...the game has the idc connectors, but this one display has been ...

Ok thank you

Thanks Sylvain...I couldn't seem to find it anywhere...mine is broken off, but game seems to play fine, everything works. Is it ok to leave it ?

anyone tell me what the bottom pin on the j4 connector of a bally -35 mpu is for? . The wire is black with red stripe and goes to solenoid driver board. I cant seem to find its purpose lol..

Anyone local have a 330 ohm 2 watt resistor ...for Gorgar flash lamp board...would like to properly repair mine. Hate to pay 20$ shipping on a 2$ part...

Anyone have a decent Bally Star Trek playfield?..

Anyone heading to Toronto wanting to deliver a pin for cash? Pick up near Portland...about 40 mins to Kingston and the 401....would probably have to be on a weekend..

Bump...still looking...

Shoot me a message..I may have something

Thank you very much !!!