Les plans sont sur le Net.
Juste a trouver un gars qui decoupe des armoires de cuisines avec une CNC.
Le gars qui vient de découpé mes armoires en fait de temps en temps.

Bought my TSPP from this guy.Machine was exactly as described and very clean.Saw the others pins from Mike and everything is as clean as a whistle...
Buy with confidence!

Buy something that is 100% working.
It will break soon enough...

Drumheadz wrote:Is that playfield overlayed?

...or maybe a ''hardtop''?

J'ai pas de couilles,donc pas de PM envoyé...
Vraiment une TRES belle Tron!

Wanna start a small project during the Christmas holidays.I'm looking for a COMPLETE kit to build a multigame cocktail table. -Where is the best place to buy (prefer Canada) ? -Jamma,Pandora and others.Which one is the best,no need for fighting games, but mostly classics from the 80's. -Don't want t...

Thanks a lot to TwilightZone and RedFive for the infos and help.
Thanks to you guys,everyone has enjot TSPP a lot!

"Brimg this Gentlemen your finest beer" Thanks a million for the very clear and detailled infos! Will try that tonite between cleaning of the gameroom and the install of new drop targets ordered sunday from marco and that i picked up last nite...custom agent recognize me as the pinball guy...

I would need a major big favor from an TSPP owner or any Stern owner with same menu system as TSPP Having a display issue that i'm trying to solve for the last 3 weeks and have been the owner for only a month. So the game plays fine but blind and i'm having a party friday night with non pinheads fri...

Thanks ToMMy...but my prayers have been answered by God himself!
Thanks for your offer!

Since Bruno retired,who's doing troobleshooting and board works around here?
Would like a fast turnaround...if possible.
Stern Whitestar system display problem.
Bad communication between mpu and dot controller...i think.
Already replace U201.

Would like your opinion on hardtops.
Look,feel,quality and effect on resale value.
Thanks!
GLWS!

Parlé de ca aujourd'hui avec un electro chez un client.Il s'est acheté une imprimante 3D sur le meme principe ( a monter soi meme) et il est tres satisfait du stock chinois qu il a recu.
25$ pour un scope christ...peu pas trouver moins cher que ca!

Nice job Toe voici mon petit apport à ton thread: J'ai acheté ce scope portatif et c'est en masse pour ce qu'on fait : https://www.aliexpress.com/item/Exclusive-Orignal-Tech-DS0150-15001K-DSO-SHELL-DSO150-DIY-Digital-Oscilloscope-Kit-With-Housing-case-box/32799175828.html?spm=2114.search0104.3.9.49...

Félicitations!
Qq t'as acheté comme logic probe ? Combien et ou? Est ce que tu pense que t'aurais du acheter un scope en partant?

Thanks Cap!
Only one more IC to check on I/O power board like they say on Pinwiki then the boards are off to Chris Higler.

Merci pour l'aide!
Je te paye la biere quand on se rencontrera!

Do you have access to another compatible machine that you could swap parts with to diagnose the problem faster? I thought no but learned that a B\W DMD is the same.So this morning ,took the TSPP DMD and plugged it in Demo man and it was working perfect. So,back to why the machine won't boot with th...

OK.Not really progress but...Must have read the Pinwiki on Whitestar boards by Stern 10 times but on the 11 th time i saw this... ''+12V on CN2-7 -- 20V is supplied at CN1-6 and is regulated down to +12V by VR1, a 7812. Note: the voltage at this pin will be missing if the board isn't stuffed with th...

I think it s generated by the display power supply board itself through some diodes and whatever electronic bidules...

Merci pour l aide!

P1 is the other end of CN2 connector...

Wish i would know how to post a screen shot from page 113 of tspp manual. Pin 7 of CN2 is supposed to have +12v but i read 0. Led 203 wich is +12v is solidly on on the power driver board. But i think the +12v for the DMD is coming from the display power supply board as there is no +12v coming in on ...

Not another Stern.TSPP is the only one...

Tabarnak! Ok.Display problem is back.As suggested,i checked voltages at the display power supply board.No +12vDC. Removed the connector and measured right on the pin of CN2,no +12v DC. Checked voltages at CN1 and everything is ok according to pinwiki 4.9.1 http://www.pinwiki.com/wiki/index.php?title...

Soooooo,you guys mean it's not normal that my battery holder is a bit loose from the board ?
I can rotate one corner 1/4"...
Should it be tight as in not bulging at all from the board ?

Hi Cap! I looked at my manual yesterday after you referrred me to it. On the same page,there is also a pix of an error message ''open coin door'' and the meaning of it.You'll get that message at every power up if there is no batteries or dead ones in the machine.Checked them tonite,pulled them all o...