MAACA.org

Contacte moi en privé . J’ai acheté le rouleau du Amazon il y a quelques temps et fait mes propre découpes avé un Cricut. Je pourrais t’en faire quelques une et envoyer dans une enveloppe postale.

Thanks! Then I will not bother to replace it.

I have made some FCC Part 15 Warning labels (self-adhesive white semi-gloss vinyl) and have some left. Whoever needs one just PM me and I will gladly mail you some. Also have some Fish Papers for coin switches and Lock Out coils freshly made

Hello all, I am almost done with my bally Dolly Parton restoration and are now completing all the labels. It seems there was a factory label on the head at one point but it does not look like the usual FCC warning we see on other Bally machine. Anyone having an idea or a picture of what that label l...

I have replaced all sockets and connectors. The problem was narrowed down to broken pins on one of the PIA Chip (6820) and the MPU (6800). On the PIA, the corrosion was so bad it has creeped inside the chip, degrading the metal inside the plastic package, I had to scape some of the plastic to gain a...

Any condition as I currently have none.

Thanks

Looking for one or two of these on a Bally Dolly Parton or similar early SS machine.

Thanks

Bally Dolly Parton Not sure if this door lock strike plate is original or no et nor how to make it work. A flat cam on the coin door lock currently does not reach close enough and an offset one I had is too bent. I modified the offset cam for now, it works but I think it could be better. What am I m...

Dented and far from pristine condition but may be useful for anyone that needs one. Will post pix very soon.

Looking for a Bally MPU board in working condition or not. Trying to troubleshoot an existing one with intermittent startup.

Let me know what ou have available before I start buying replacement chips or an Altek board!

Thanks

Rebuilding back box panel for my Dolly Parton

Interested if still available. PM sent

Well,

I haveDolly Parton In rough shape if you would like to experiment. Willing to provide it for the cause (the one on the left)

Mrhide wrote: ↑

Mon Mar 08, 2021 9:25 pm

bele2009 wrote: ↑

Mon Mar 08, 2021 7:21 pm

Mrhide wrote: ↑

Mon Mar 08, 2021 4:49 pm

My name is Phil and I have a connector abuse problem

IMG_6299.jpg

Nice assortment! I am about to place a similar order at Digikey for massive re-pin work. Would you mind sharing the Digi-Key PNs you used?

Thanks

Re pin quoi? pinball? arcade?

Pinball Bally Dolly Parton et Xenon.

Mrhide wrote: ↑

Mon Mar 08, 2021 4:49 pm

My name is Phil and I have a connector abuse problem

IMG_6299.jpg

Nice assortment! I am about to place a similar order at Digikey for massive re-pin work. Would you mind sharing the Digi-Key PNs you used?

Thanks

Melted a newly rebuilt linear flipper coil on my new Xenon due to a mis adjusted EOS switch 😡 Probably moved out of alignment in shipping and I was too eager to try playing it. Lesson learned! If someone in the Montreal area having a spare AQ-25-500/34-4500 and sleeve I am now looking for one. Hey ...

Melted a newly rebuilt linear flipper coil on my new Xenon due to a mis adjusted EOS switch Probably moved out of alignment in shipping and I was too eager to try playing it. Lesson learned!

If someone in the Montreal area having a spare AQ-25-500/34-4500 and sleeve I am now looking for one.

The FR-301 works with the N61 series nozzles instead. Mine came with the N61-08 1.0mm nozzle. Were you recommending a specific size? I have the same gun and this is the best tool to have on hand when doing a complete Playfield swap. Doing wonder on the light sockets and braid wire. I found the orig...

Was scratching my head why Dolly looks « weird » on the replacement Playfield... After M/E cleaning, you can see the flesh coloured silkscreen slipped during production. Teeth are messed up, nothing a touch of Createx white can’t fix! Note to self at the touch-up time. 🤔 P.S. magic eraser is doing w...

Working on Dolly Parton Playfield swap... parts in tumbler / Ultrasonic cleaner while I work on paint touch-ups. PITA that most craft stores are closed, the required paints (createx) are hard to come by these days 🤨 F536F3DE-3FB7-4556-9D74-F3D91C42352B.jpeg F93DCFF2-AC04-489C-8908-405D75728737.jpeg ...

Update:
Finally found the Hooly Grail... will post an update once I receive it but it looks like exactly what is required!

https://www.newegg.ca/p/2RC-09KT-04JR1 ... DV2DEK3157

Guys,

Where can I buy replacement bus wire used on Bally’s early SS machine? Maybe I am not using the right keywords but I cannot find much.

Any recommendations are welcome.

Thanks

Hello all,

I have the opportunity to buy a pinball machine in North Eastern US. Am I crazy to consider importing it ( would not mind taking care of the custom clearance myself)?

Any suggestions or recommendations for a carrier would be appreciated.

Regards,

Eric

Interested. Following this thread very closely

Remember playing this machine a lot in the 80’s at our local bowling alley. Looking for Xenon machine, preferably in project state. Willing to pay fair market value.

Pm if you have anything available or know where there is one available.

Happy New Year

Interested. Finishing a 468 and 474. With the 3 I could surely make 2 good ones . Pm sent