Molex connectors and pins

Wanted Pinball Parts only Please
Post Reply
User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Molex connectors and pins

Post by slither »

Does anyone have a link for a supplier of molex connectors and trifurcon pins for classic bally/stern pins? . I see that gpe is no more....I tried searching around mouser, digi key etc but am not having much luck. Im looking for the 2 basic sizes..I believe.156 and .100 . Thanks .

User avatar
Mrhide
MAACA OG
Posts: 11964
Joined: Fri Nov 20, 2009 6:59 pm
Location: Laval
Has liked: 308 times
Been liked: 185 times

Re: Molex connectors and pins

Post by Mrhide »

you take the part number from GPE and you put in digikey's search and voila?!
Crimp Contact, 0.156", Trifurcon, 22-26AWG
https://www.digikey.ca/en/products/deta ... EYwpAXQF8g
Crimp Contact, 0.156", Trifurcon, 18-20AWG
https://www.digikey.ca/en/products/deta ... MGYQF0BfIA

oh... but digikey don't have the Molex Part Number 08-50123 Series KK® Pin or Socket Non-Gendered Contact Termination Crimp Wire Gauge 22-30 AWG 0.100 though...
they do:
https://twistywristarcade.com/100-kk-se ... g-tin.html
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!

shovelhed
MAACA Super Contributor
Posts: 553
Joined: Mon Nov 03, 2014 12:43 pm
Location: Ottawa, ON
Has liked: 1 time
Been liked: 3 times
Contact:

Re: Molex connectors and pins

Post by shovelhed »

To add to this. Great Plains electronics will have many hard to find Molex bits as well as Arcadepartsandrepair:

https://www.greatplainselectronics.com/ ... asp?cat=35
https://www.arcadepartsandrepair.com/

User avatar
Mrhide
MAACA OG
Posts: 11964
Joined: Fri Nov 20, 2009 6:59 pm
Location: Laval
Has liked: 308 times
Been liked: 185 times

Re: Molex connectors and pins

Post by Mrhide »

shovelhed wrote:
Tue Nov 15, 2022 11:12 am
To add to this. Great Plains electronics will have many hard to find Molex bits
https://www.greatplainselectronics.com/ ... asp?cat=35
You haven't read the news from greatplains:

Latest store news
10 September 2022 -
After more than 20 years, I have retired.
Great Plains Electronics will not be taking any further orders.
All existing orders have been filled or are in the process of being filled.
To all my customers - it has been my honor serving you.

:(
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!

User avatar
R.A.B.
MAACA Mega Contributor
Posts: 3454
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 191 times
Contact:

Re: Molex connectors and pins

Post by R.A.B. »

slither wrote:
Sun Nov 13, 2022 1:01 pm
Does anyone have a link for a supplier of molex connectors and trifurcon pins for classic bally/stern pins? . I see that gpe is no more....I tried searching around mouser, digi key etc but am not having much luck. Im looking for the 2 basic sizes..I believe.156 and .100 . Thanks .
Have them (.156 and .100) in quantity at Alouette Slither.

You know my hours at the office, Mon.Wed.Fri for parts, the rest of the time on the cell.

Rab
http://www.montrealpinball.com
https://amusement.evolvo.com/

Bally 1936 "Bumper" - North Star 1950 "Richelieu" - Universal 1950 "Feature Bell" - Gottlieb 1952 "Queen of Hearts" - Williams 1960 "Ten Spot" - Gottlieb 1971 "Challenger" - Williams 1973 "OXO" - Bally 1976 "Bonanza"

Maxed out at 10 machines, no more. Un max de 10 machines, pas plus.
Une règle suivi guéri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to adjust an AX relay or relieve a woman friend from sighing, there will only be memories to fill my time. So, the task at hand is to build that RRSP of memories in order to joyfully cushion the later stages of life.

Personally prefer the exceptional qualities lurking beneath any normal state of affairs. Alas, our day to day is being promoted as extraordinary via a world wide web largely fueled by the new dumb & followed closely by the latest breed of unscrupulous scoundrels & judas goats. So, god bless the fool hearted, the crazed, and the railroaded in good measure for they will likely inherit what is left of the earth after the screwheads are done with it. God damn darwinian primates, why do they refuse to evolve, even after all we should have learned from being savages for so long.

"I try my best to be just like I am, but everybody wants you, to be just like them. " - Zimmy

User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Re: Molex connectors and pins

Post by slither »

Ill txt you tomorrow...I need some .100 I got some .156.. already...Thank you !

Post Reply