Gorgar speech board

Wanted Pinball Parts only Please
Post Reply
User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Gorgar speech board

Post by slither »

Looking for a working speech board for Gorgar, need asap as game is sold and being picked up end of week...alternatively any info on speech board amp chip and where to get one would be great , have speech, but super low volume. I just had this board redone, lasted a few games with new roms, then lost voice again..

User avatar
steamfitter
MAACA Mega Contributor
Posts: 1255
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Has liked: 72 times
Been liked: 104 times

Re: Gorgar speech board

Post by steamfitter »

Not the best option for asap , in normal times within 2 weeks delivery

https://nvram.weebly.com/wms-d8224-squa ... peech.html
Pins: Black Hole , Lightning , Flash Gordon , Firepower , Jacks to Open,
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1

http://WWW.pinballowners.com/steamfitter

User avatar
semicolin
MAACA Mega Contributor
Posts: 1143
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Has liked: 159 times
Been liked: 201 times
Contact:

Re: Gorgar speech board

Post by semicolin »

Make sure it isn't the remote volume potentiometer (or the header connections to it). On sound board, locate header 10J4 and jumper together pins 1 and 2, the two that aren't separated by the key space. Your game should immediately go to full volume. If it does not, then yes, your problem is on the sound board.

If you don't mind driving out to Kanata, I have a spare TDA2002 amplifier chip you can have for $10. Send me a PM and we'll make arrangements.

User avatar
semicolin
MAACA Mega Contributor
Posts: 1143
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Has liked: 159 times
Been liked: 201 times
Contact:

Re: Gorgar speech board

Post by semicolin »

Following up: were you able to fix this?

User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Re: Gorgar speech board

Post by slither »

Sorry been crazy busy....I was told it would not be the 2002 amp chip as all normal game sounds were working, and they use the same amp. I replaced the 2 1458p on the speech board..and all working !!! Thank you !

Post Reply