Harlem Globetrotters playfield
-
slither
- MAACA Super Contributor
- Posts: 522
- Joined: Thu Sep 16, 2010 11:49 am
- Location: Portland, Ont.
- Been liked: 2 times
Harlem Globetrotters playfield
Looking for a loaded Harlem Globetrotters playfield...Thanks.. also looking for some Silverball Mania pf parts..
-
semicolin
- MAACA Mega Contributor
- Posts: 1170
- Joined: Sun Apr 17, 2016 4:32 pm
- Location: Ottawa, ON
- Has liked: 170 times
- Been liked: 213 times
- Contact:
Re: Harlem Globetrotters playfield
What SB mania parts are you looking for? I have a big pile of bally bits and bobs and I might be able to help.
Sharing my space with: Meteor, Tag Team, Dragon, Centaur II, Middle Earth, Xenon, Captain Fantastic, Dolly Parton, Star Trip, Street Fighter cab w/Premium 8
-
slither
- MAACA Super Contributor
- Posts: 522
- Joined: Thu Sep 16, 2010 11:49 am
- Location: Portland, Ont.
- Been liked: 2 times
Re: Harlem Globetrotters playfield
Topside parts, my pf is missing the posts/screws, plastics, some pop bumpers, the wire guides by the slingshots etc . I can send you a pic later lol...
-
semicolin
- MAACA Mega Contributor
- Posts: 1170
- Joined: Sun Apr 17, 2016 4:32 pm
- Location: Ottawa, ON
- Has liked: 170 times
- Been liked: 213 times
- Contact:
Re: Harlem Globetrotters playfield
Alright, you've got more work to do than I thought. I have a bunch of red jewel posts, but I think SBM is finned. plastics is a no go, I have some rods and rings, wire guides I just manufacture from stainless welding wire from princess auto.
Most of this is available new/repro fairly inexpensively; bally stuff is good for that. Check out pinball medics(ontario-based), marco, etc.
Most of this is available new/repro fairly inexpensively; bally stuff is good for that. Check out pinball medics(ontario-based), marco, etc.
Sharing my space with: Meteor, Tag Team, Dragon, Centaur II, Middle Earth, Xenon, Captain Fantastic, Dolly Parton, Star Trip, Street Fighter cab w/Premium 8
-
semicolin
- MAACA Mega Contributor
- Posts: 1170
- Joined: Sun Apr 17, 2016 4:32 pm
- Location: Ottawa, ON
- Has liked: 170 times
- Been liked: 213 times
- Contact:
Re: Harlem Globetrotters playfield
3/32" seems to work pretty well. I use a wire bending jig from Lee Valley tools, but the pinball suppliers all seem to sell the same one.
Sharing my space with: Meteor, Tag Team, Dragon, Centaur II, Middle Earth, Xenon, Captain Fantastic, Dolly Parton, Star Trip, Street Fighter cab w/Premium 8
-
steamfitter
- MAACA Mega Contributor
- Posts: 1260
- Joined: Fri Feb 06, 2015 1:31 pm
- Location: Orleans ( Ottawa )
- Has liked: 74 times
- Been liked: 105 times
Re: Harlem Globetrotters playfield
Silverball Mania parts 
How many post do you need ? If you give me center to center of the holes I'll check if I have those wires . I have full used set of plastics and caps etc....
Too many used parts
Just need a list .
For a good cause Free
Denis
How many post do you need ? If you give me center to center of the holes I'll check if I have those wires . I have full used set of plastics and caps etc....
Too many used parts
Just need a list .
For a good cause Free
Denis
- Attachments
-
-
Pins: Black Hole , Lightning , Flash Gordon , Future Spa, Pink Pather
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Arcade hang on
Arcade projects ; hang on , double ridge racer 2 , space invaders 412 in 1
Projects : fireball (home edition ) , seeburg LPC-1 , Excalibur
http://WWW.pinballowners.com/steamfitter
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Arcade hang on
Arcade projects
; hang on , double ridge racer 2 , space invaders 412 in 1Projects : fireball (home edition ) , seeburg LPC-1 , Excalibur
http://WWW.pinballowners.com/steamfitter
-
slither
- MAACA Super Contributor
- Posts: 522
- Joined: Thu Sep 16, 2010 11:49 am
- Location: Portland, Ont.
- Been liked: 2 times
Re: Harlem Globetrotters playfield
Thats amazing !! Need all plastics, except upper 2 corners, 26 posts and screws lol..ill send you a picture , This is 3td time I replied but it doesnt post...weird.
