Harlem Globetrotters playfield

Wanted Pinball Parts only Please
Post Reply
User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Harlem Globetrotters playfield

Post by slither »

Looking for a loaded Harlem Globetrotters playfield...Thanks.. also looking for some Silverball Mania pf parts..

User avatar
semicolin
MAACA Mega Contributor
Posts: 1143
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Has liked: 159 times
Been liked: 201 times
Contact:

Re: Harlem Globetrotters playfield

Post by semicolin »

What SB mania parts are you looking for? I have a big pile of bally bits and bobs and I might be able to help.

User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Re: Harlem Globetrotters playfield

Post by slither »

Topside parts, my pf is missing the posts/screws, plastics, some pop bumpers, the wire guides by the slingshots etc . I can send you a pic later lol...

User avatar
semicolin
MAACA Mega Contributor
Posts: 1143
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Has liked: 159 times
Been liked: 201 times
Contact:

Re: Harlem Globetrotters playfield

Post by semicolin »

Alright, you've got more work to do than I thought. I have a bunch of red jewel posts, but I think SBM is finned. plastics is a no go, I have some rods and rings, wire guides I just manufacture from stainless welding wire from princess auto.

Most of this is available new/repro fairly inexpensively; bally stuff is good for that. Check out pinball medics(ontario-based), marco, etc.

User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Re: Harlem Globetrotters playfield

Post by slither »

Thanks ..what size of wire do you use for the guides ?

User avatar
semicolin
MAACA Mega Contributor
Posts: 1143
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Has liked: 159 times
Been liked: 201 times
Contact:

Re: Harlem Globetrotters playfield

Post by semicolin »

3/32" seems to work pretty well. I use a wire bending jig from Lee Valley tools, but the pinball suppliers all seem to sell the same one.

User avatar
steamfitter
MAACA Mega Contributor
Posts: 1255
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Has liked: 72 times
Been liked: 104 times

Re: Harlem Globetrotters playfield

Post by steamfitter »

Silverball Mania parts :FP:

How many post do you need ? If you give me center to center of the holes I'll check if I have those wires . I have full used set of plastics and caps etc....
Too many used parts :FP:
Just need a list .
For a good cause Free

Denis
Attachments
20220826_151859.jpg
20220826_151945.jpg
Pins: Black Hole , Lightning , Flash Gordon , Firepower , Jacks to Open,
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1

http://WWW.pinballowners.com/steamfitter

User avatar
slither
MAACA Super Contributor
Posts: 495
Joined: Thu Sep 16, 2010 11:49 am
Location: Portland, Ont.
Been liked: 2 times

Re: Harlem Globetrotters playfield

Post by slither »

Thats amazing !! Need all plastics, except upper 2 corners, 26 posts and screws lol..ill send you a picture , This is 3td time I replied but it doesnt post...weird.

Post Reply