WTB: Golden Tee PCB or rom set

WANTED arcade parts only
Post Reply
Espo1713
MAACA Silent Type
Posts: 59
Joined: Wed Jan 11, 2017 8:02 pm
Location: Windsor

WTB: Golden Tee PCB or rom set

Post by Espo1713 »

Looking for a new U15 rom for Golden tee. (Or a complete board if available)
Machine won't boot and hoping this may be the issue.
20200628_181341.jpg
20200628_181341.jpg
Attachments
20200619_221847.jpg

MIkea
MAACA Silent Type
Posts: 32
Joined: Fri Sep 15, 2017 9:32 am
Location: Milton

Re: WTB: Golden Tee PCB or rom set

Post by MIkea »

The boot ROM probably won’t fix it, unless there is obvious damage or corrosion and everything else is fine. Where does it get stuck in the boot sequence?
If you want to try a new ROM Dave Astill can burn you a new 2.09 version and send it out, he’s done many for me.

Espo1713
MAACA Silent Type
Posts: 59
Joined: Wed Jan 11, 2017 8:02 pm
Location: Windsor

Re: WTB: Golden Tee PCB or rom set

Post by Espo1713 »

It has an LCD monitor in it hooked up directly from VGA to the video board. (tried a secondary monitor to make sure it worked). There's no sound and a "no signal" message when powered on. On the actual board we have a flashing green light at "Status 2" but a solid green light at "Status 1" which is right next to that U15 chip. Power at Jamma harness checks out as well. Any idea if that will fix the issue?

I think i see daves contact online so i think ill give him a call in the small chance it works - would be a cheap easy fix.

Thanks

Post Reply

Return to “Arcade Parts WANTED / Pièces machines Arcades recherchées”