WHERE TO GET PARTS in CANADA!!!

[Sparky]

Hey guys,

Here is a basic thread on where you can get parts! I will add the info here, or better yet, YOU CAN TO!!!

So, let's list parts vendors, for VIDS and PINS!!!

VARIOUS PARTS!!!
ALOUETTE AMUSEMENT:
8505, chemin Delmeade, Montréal, QC, H4T 1M1
514-342-9111, ask for Robert!!
https://www.alouetteamusement.com/

PLAYER ONE MTL:
1200 Rue Bégin, Saint-Laurent, QC H4R 1X1
(514) 856-2252
(I believe that they still offer parts pick-ups)
https://www.winwithp1ag.com/parts-service

PLAYER ONE T.O.:
6420 Viscount Rd, Mississauga, ON L4V 1H3
(416) 251-2122

PINBALL MEDICS:
(Parts depot at The Neighbourhood Pub at 2559 Baseline Rd., Ottawa, ON K2H 7B3
613-223-6108 pinballmedics@gmail.com
https://pinballmedics.ca/
Full parts and BOARD REPAIR SERVICE, by GOTTLIEB ROB!!

DAVE ASTILL. (Member link: memberlist.php?mode=viewprofile&u=218 )
Roms, games, LEDS and lots of parts! Based in Collingwood, ON.

DRAPL Store
Run by TrueJedi (Menber link: memberlist.php?mode=viewprofile&u=5826 )
https://pinballleds.ca/index.php?route=common/home
LEDs, and lots of other parts. Based in the Toronto area.

John's Jukes
Based out of BC!! A great source of parts and oddball rare stuff since 1982!!
UNIT #7 - 3979 Marine Way, Burnaby, BC V5J 5E3
https://www.flippers.com/

ROMS, CUSTOM ELECTRONICS and BOARD REPAIR!!!!!!
STEPH at Hobby Roms (Member link: memberlist.php?mode=viewprofile&u=148 )
http://www.hobbyroms.com
Based in Ottawa. Can get you pretty much ANY roms programmed!!!

ToMMy!!!
memberlist.php?mode=viewprofile&u=329
Brent does board repair, sells nvram kits on Ebay and
tommy (dot) pinball (at) gmail (dot) com
tommy_pinball on ebay: https://www.ebay.ca/usr/tommy_pinball?_ ... 2749.l2754

ELECTRONICS!!!
DIGIKEY
http://www.digikey.ca
Yes, a bit pricey, but order for more than 100$ and NEXT DAY shipping is free! I have gotten some orders delivered in less than 13 hrs... Well worth it. Get an order together with buddies.

VIDEOGAME PARTS!!
Canadian Arcade Builders Supply
Joysticks, cap kits, flybacks and lots of parts to build a MAME cabinet
https://arcadebuilders.ca/
https://www.facebook.com/CanadianArcadeBuildersSupply

RetroActive Arcade
Lots of arcade parts. They carry IL - EUROJOYSTICKS. These are the original design for MK, NBA JAM, KI and other early 90s Midway joysticks... a must if you own any of these games
https://retroactivearcade.ca/


PLAYFIELDS, PLASTICS, ETC!!
Classic Playfields Reproductions
https://classicplayfields.com/
Based out of Nova Scotia!!!

VIRTUAL PINBALL ITEMS!!
Zeb's boards!
https://shop.zebsboards.com/

PLEASE post more sources!! I will add them to the primary post here!! Help newer collectors out and let's show what Canadian companies have to offer!!!!

[Sparky]

Info added and thread cleaned up. I will update daily, or when someone posts here with a contact!

Ian

[Fifty]

I would like to suggest renaming this thread to "Where can I buy..." or "Where in Canada can I buy..."

I love the concept of this thread. I love that the point of it is to keep our purchases within Canada. However, none of the places listed so far apply to me. I would like to see more basic stores and contacts in here. What do you think?

Here is an example, I need a hex standoff post for my game. I also need SEMS Phillip head screws for this same hex post. Are these available at Fastenal? Where can I go in Ottawa to buy these?

[dr.nybble]

Check the spaenaur.com catalog for fasteners. They can order it for you at the Tool & Equipment store.

Let me know what SEMS screw you need I might have them. Once you get a box it’s a lifetime supply.

I’ve also found Phillips screws on Amazon but their search sucks.

[DrSmooth]

Try:
Gervais Electronics
Ottawa Fasteners
ADI
Tri-ed which has been bought by Anixter
Canada Computers (but I doubt it)

[Fifty]

Thanks everyone. I did a lot of digging last night. The p/n is 4006-01017-06 which can be found at Marco, but I won't be ordering it from there. I'm sure I can find it at Fastenal and now I know the screw measurements (Machine screw 6-32 thread x 3/8" long with phillips round head and external tooth lockwasher.) Looks like Marco has changed it from a round head to a pan head. I guess round ones are getting harder to find or something.

The standoff I was able to find at Digikey. https://www.digikey.ca/en/products/deta ... ehr4m4t1AA It's almost an exact match. I need to order some fuses and a battery case, so I'll probably put together a small order and include it in the order.

[dr.nybble]

I've got a box of 100 of those screws from Spaenaur. PM me if you want me to leave you some in my mailbox.

[semicolin]

Ottawa Fastener Supply in Bell's Corners.

[dr.nybble]

Try searching www.hillmangroup.com to find the part number. Then search that part number on amazon.ca. Got lots of Phillips fasteners that way.