Matching parts to members (And you know that notion, just crossed my mind)

Have questions on how to fix your machine or what products to use? This is the place to ask for help.
User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Stumbled upon 50, yes fifty N.O.S. coils for Chicago Dynamic Industries (Chicago Coin later to become Stern in 1977).
"Aye Captain, there be coils here." "Shut up and eat your god-dam fish Billy, you smart ass child actor."
"Aye Captain, there be coils here." "Shut up and eat your god-dam fish Billy, you smart ass child actor."
Well, that is not so interesting, and it is pretty common to find new and old dusty parts here, especially coils. Lots of those around and classifying them is a not a task for the faint hearted.

What is of real interest here is the coil number.

J-22-550 (wire gauge 22 at 550 turns) was a very common winding used in many William EM games, mostly on stepper units. Williams used part number A-22-550 which is the same damn thing. So this CCM coil can be substituted to work just as well in EM Williams games and early Stern games as well.

$ 4.00 each - stock up, I know I will.

At that price the coil does not come with a sleeve. If you need some, they are .85/each.
Last edited by R.A.B. on Wed Aug 15, 2018 10:59 am, edited 2 times in total.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Same deal for these.
Lots of these N.O.S. CCM coils in stock
Lots of these N.O.S. CCM coils in stock
FJ-24-850 & FJ-25-1050

Lots in stock, and again - the first # is the wire guage and the second number the turns. Bally and Williams and Stern used these coil windings, it is just that the wrapper on these N.O.S. coils say C.D.I. (Chicago Dynamic Industries) which I think is kind of cool.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

On a side note, I won't be at Alouette tomorrow by exception. (reg schedual is Mon/Wed/Fri), but you can text me, e-mail or PM your questions/requests. Always glad to help members who are clear and cool as Northern running streams. Just give me a little time to answer, I will be on and off the grid tomorrow watching the river flow.

Rob
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Another elusive little part has been found in the bowels of the parts shelves.

P-7939-1 Bally in-line drop target assy. nut and spring bracket

Well, a picture is worth more than my words right now. Apparently there is a left and a right to this thing, part number above is for the left one, and as you can see just above that there are two sides to this story.
20180820_153143.jpg
$5.00/ea. (not available at your regular parts store) :D
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Found more odd ball new old stock today. So even after 6 months of employment, I am still surprised. (That is a good thing to maintain later in life.)

Plastic rod & ring ? No one in their right mind would use these, right ? LOL Must be a bunch of salesman samples I found today.
20181012_094627.jpg
20181012_094609.jpg
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
redketchup
MAACA Wacko
Posts: 4775
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 19 times
Been liked: 39 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by redketchup »

Oh que c'est beau!!!!
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

redketchup wrote:Oh que c'est beau!!!!
Oui c'est vrai que c'est beau, même si ont sait que ca va briser. :(

Les découvertes continue dans ce man cave.

Content d'être le gars a "faire la job" de décoder tous ca avec vous autres.

Et aussi très content de trouver un sens a ma job et de ne pas avoir a justifier mes choix et decisions au boulot, et surtout de pouvoir sauver des pièces du container et le diriger dans les bons mains. :lol:
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

More weirdness found upstairs of the parts dept. near the bingo machine graveyard.
20181019_080225.jpg
Yes it is a ball arch gate assembly, I was just wondering if anyone knows for which game. This lonesome thing has got some kind of guard spot welded on at exactly the same angle on all 5 units which I have found here so far. The guard is made of steel, not spring steel, so I assume is was to prevent a ball from getting into a lane below the guard.
20181019_080210.jpg
20181019_080153.jpg
My guess is that it is a Bally part, but.....

Any ideas ?
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
Drano
MAACA Millennial
Posts: 1206
Joined: Fri Jan 27, 2012 4:58 pm
Location: Toronto
Been liked: 1 time

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by Drano »

I forgot about this thread.
I'm slowly getting my prototype Bally Heavy Metal Meltdown back to its former glory and one of the biggest hacks on this machine are the flipper mechs.
The right one has been completely replaced with a gottlieb mech. Would love to get a right side Bally flipper mech and two correct coils if you have any.

Other smaller needs include the white plastic tub that covers the on/off switch from inside on these older Bally games.

And... the black plastic "cup" that the main power cord feeds through on the back of most system 11 machines would be a great find too!

Thanks Robert!

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Drano wrote:I forgot about this thread.
I'm slowly getting my prototype Bally Heavy Metal Meltdown back to its former glory and one of the biggest hacks on this machine are the flipper mechs.
The right one has been completely replaced with a gottlieb mech. Would love to get a right side Bally flipper mech and two correct coils if you have any.

Other smaller needs include the white plastic tub that covers the on/off switch from inside on these older Bally games.

And... the black plastic "cup" that the main power cord feeds through on the back of most system 11 machines would be a great find too!

Thanks Robert!
Hey Drano - chances are good that I will be in T.O. for the Church's swap meet.

Part numbers for your flipper requests (plates and coils) would be appreciated, makes the likelihood of getting the wrong parts less likely since this is Bally/Midway weirdness. I think that they were still using in-line flipper assemblies I would guess. Coil number would be your standard AQ25-500/34-4500, please confirm.

I can figure out the "tubs" & "cups" from your description.

On another note -

Found a whack of these as well, all N.O.S. - I can sell these for $ 5.00 each.

https://www.marcospecialties.com/pinball-parts/A-3459-1
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
Drano
MAACA Millennial
Posts: 1206
Joined: Fri Jan 27, 2012 4:58 pm
Location: Toronto
Been liked: 1 time

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by Drano »

Sorry Robert.
For the life of me I could not find the Flipper coil designation in the manual. They just give a part # for the entire assembly with no specifciation for the coil. It's this one (for the right one anyway)

https://www.marcospecialties.com/pinbal ... E-1587-102

I've even combed through the schematics to see if I can locate it.
Sadly, the original coils don't even have the wrappers any longer.


BTW.
If you have any of those Stern pop bumper mechs you posted above with the palstic rings, I'll take some. I shot you a PM.
I will be at the church and can certainly grab the stuff from you there.

Thanks!

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Drano wrote:Sorry Robert.
For the life of me I could not find the Flipper coil designation in the manual. They just give a part # for the entire assembly with no specifciation for the coil. It's this one (for the right one anyway)

https://www.marcospecialties.com/pinbal ... E-1587-102

I've even combed through the schematics to see if I can locate it.
Sadly, the original coils don't even have the wrappers any longer.


BTW.
If you have any of those Stern pop bumper mechs you posted above with the palstic rings, I'll take some. I shot you a PM.
I will be at the church and can certainly grab the stuff from you there.

Thanks!
PM sent about the pop bumper assemblies. (There is a bit of bidding going on for these amongst the "purists")

Found a picture of your machine on ipdb.org which you contributed and they do look like in-line flippers (except for the Gottlieb assy on the right- lol)

https://www.ipdb.org/showpic.pl?id=1150&picno=69965

The coil number would likely be the one I mentioned, so if you need just the flipper base mounting plate plate and coil, I have both here. If you need the whole flipper assembly with the parts mounted on the plate, I think I have one as well.

Another possible match made.

This thread is sort of like a dating site for parts and members.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
Drano
MAACA Millennial
Posts: 1206
Joined: Fri Jan 27, 2012 4:58 pm
Location: Toronto
Been liked: 1 time

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by Drano »

Thanks Robert.
Yes, in-line for sure. They look just like what I've got in Fathom.

The coils are the main things but yes, the bracket would be a big help. If you have other parts for that assembly (coil stop, plunger, lever etc..) I'll take as much as you have. But, worst case, I may have old ones kicking around that can be refurbished if necessary. I like to squirrel stuff like that away :)

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Drano wrote:Thanks Robert.
Yes, in-line for sure. They look just like what I've got in Fathom.

The coils are the main things but yes, the bracket would be a big help. If you have other parts for that assembly (coil stop, plunger, lever etc..) I'll take as much as you have. But, worst case, I may have old ones kicking around that can be refurbished if necessary. I like to squirrel stuff like that away :)
Understood, I will bring what I have to accomodate.

Rob
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Back at work today and happy to be here, no traffic this morning and off tomorrow.


Trying to figure out where the heck I left off on December 21st after Christmas dinner at work with my 6 other co-workers.
20181221_125653.jpg
There use to be over 100 employees here in the 80's and 90's. Lunch room is pretty big, but most of the employees back then were on the road.

Still have 3 X N.O.S. classic Stern pop bumper assy. left of the 8 I found last year.

45 bones each, 3 for $ 125.00. SOLD

Rob
Pop Bumper assy. N.O.S. 80's.jpg
Pop Bumper assy. N.O.S. 80's.jpg (26.19 KiB) Viewed 1258 times
Last edited by R.A.B. on Wed Jan 09, 2019 10:01 am, edited 1 time in total.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
Sparky
MAACA OG
Posts: 23133
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL
Been liked: 12 times

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by Sparky »

Rob, I will take those Stern assemblies, and was wondering if I can order a set of 3 drop targets for a Gottlieb Totem... the yellow ones with the "explosion" graphic in the middle. Steve Young has them...
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349

User avatar
Chris Silver
MAACA Wacko
Posts: 3099
Joined: Thu Jul 28, 2011 8:41 pm
Location: Hawkesbury, Nowhere Ontario
Been liked: 1 time

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by Chris Silver »

Sparky wrote:Rob, I will take those Stern assemblies, and was wondering if I can order a set of 3 drop targets for a Gottlieb Totem... the yellow ones with the "explosion" graphic in the middle. Steve Young has them...
I'm swinging by Rob and will pick them up sometime after lunch Friday. I also have a list of parts to order and an Alouette gift certificate from my wife. :)
Pins: Spirit, Centaur II, Af-Tor, Embryon, Black Hole, Elektra, Timeline, Silverball Mania, Panthera, Baby Pac Man, Blackout, Alien Poker
Gone: Space Station, Top Score, Flash Gordon, Solar Fire, Haunted House, Fire (x2), Vector, Bally Playboy, Tropic Isle, Beat the Clock, Blue-Chip, Disco, Punk!, Lightning, Time Fantasy, 8 Ball Deluxe LE, Double Dragon, Stellar Wars
WTB: Black Knight, Fathom, Split Second, Nine Ball
Its better to have played and lost than never to have played at all.

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

Found 2 of these paper clip dispensers. I am keeping one at my desk.

For sale at the parts counter. 20 bones for the one with dust (shown below) and 25 bones for the one that looks like it was never used. Easy decision I think for any System 3 fan.

SOLD
Magnet ball paperclip dispenser from Premier
Magnet ball paperclip dispenser from Premier
Last edited by R.A.B. on Wed Jan 09, 2019 3:37 pm, edited 1 time in total.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
OTTOgd
MAACA OG
Posts: 6509
Joined: Wed Nov 18, 2009 10:45 pm
Location: Brampton, Jewel of the Golden Horseshoe
Has liked: 7 times
Been liked: 1 time

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by OTTOgd »

Gosh, that's nifty. Love my Stargate. Don't mind the 80B's I have too. Save me one, please.

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

More weirdness from the bowels of 8505 Chemin Delmeade in the Town of Mount-Royal believe it or nuts.

Pictured below are not original Bally bingo backglasses, but they are silk screend on glass. Have about 6 @ $ 60.00/ea. and yes they are new.
20190107_144840.jpg
20190107_144733.jpg
As well, I found some N.O.S. spinners, not sure of the games they were used on right now, so you guys tell me, they are more your era I reckon.
20190125_142748.jpg
Two double spinners with an ugly face on them are $ 30.00/ea. The single ugly face ones are 20.00/ea and so is the airplane and upsidedown stand up swing target thingy.

ALSO :

GTB Sinbad N.O.S. sowrd spinners (not pictured) P/N A-18151 - 10$ each, have about 5.

R.A.B. - finally where he should be and at your service 3 days a week. :D
Last edited by R.A.B. on Mon Jan 28, 2019 9:51 am, edited 1 time in total.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
cap
MAACA Millennial
Posts: 1002
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by cap »

That airplane spinner is for F14.
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat

User avatar
Azatotht
Admins
Posts: 9011
Joined: Wed Nov 18, 2009 9:32 pm
Location: Anjou (Montreal)
Has liked: 18 times
Been liked: 20 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by Azatotht »

These are Swords of Fury spinners...
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

I know that this feeling is probably silly at this stage of my life, but I still get a 'fizz' when I receive parts. The best thing about buying parts to me these days is that I get to sell them to people who are more thrilled by the hobby than the business.

Williams P/N A-19514 just arrived, 16 of the buggers out of which 4 are reserved for my philosophical pinball pal Ballyhoo - I can still price them @ 25$/ea + tx(CAD) for now, despite the freakin' wild & crude assed Trump dollar.
20190206_074314.jpg
God bless America.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
R.A.B.
MAACA Wacko
Posts: 3276
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 10 times
Contact:

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by R.A.B. »

One more N.O.S. old Stern part found.

P/N A-157-1 SLING SHOT ARM (n.o.s.) 10.00/EA
P/N  A-157-1
P/N A-157-1
Manuals and parts books for early Sterns that have come up so far (1977-1983)
Stern documents
Stern documents
This is what is left after a whole bunch of classic Stern documentation has already left for Ontario.

Stern Parts Catalog (2 copies left) $20.00
Big Game manual & schematics $ 20.00 - SOLD
Stingray - manual only and/or instruction cards etc $10.00 - 15.00
Galaxy - manual & schematics & score and instruction card set - $ 20.00
Stars - manual & schematics $20.00
Last edited by R.A.B. on Mon Apr 01, 2019 7:40 am, edited 1 time in total.
http://www.montrealpinball.com
http://www.northstarpinball.com
http://www.alouetteamusement.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman friend from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

And yes, some of us need something to do besides contemplate how important everyone has suddenly become in a world of self-promotion upheld by the new dumb.

"Ah, you god damn writers, never a good word for anything. Hell, you never really know what they will do or say." My Alter Ego

User avatar
hurricane
MAACA Buck
Posts: 138
Joined: Fri Jul 13, 2012 7:22 am
Location: Hicksville, Ontario

Re: Matching parts to members (And you know that notion, just crossed my mind)

Post by hurricane »

Hey RAB - long time no chat! I'll take the Big Game if it's not spoken for already. Tanks!

Post Reply

Return to “Pinball and Videogame Tech”