Spring on stepper unit

Have questions on how to fix your machine or what products to use? This is the place to ask for help.
mbudman
MAACA Collaborator
Posts: 218
Joined: Thu Oct 04, 2012 11:33 pm
Location: Montreal

Spring on stepper unit

Postby mbudman » Sat Feb 09, 2019 5:42 pm

Hello,

I am working on a 1949 Gottlieb Basketball that has been sitting for 13 years.

One of the stepper units is not working properly. The tension from the spring does not make it return to its starting position.

Initially it was too tight, so I loosened it and it can turn quite freely now (but maybe not freely enough).

I increased tension on the spring, but it has not resolved the issue. Any suggestions?

Here are the pics:

20190209_172043_resized.jpg

20190209_172012_resized.jpg

User avatar
novaguy
MAACA Barbarian
Posts: 566
Joined: Fri Sep 17, 2010 6:01 am
Location: Fenelon Falls

Re: Spring on stepper unit

Postby novaguy » Sat Feb 09, 2019 8:32 pm

Did you pull out the the gear and clean and lube the shaft?
Ted

User avatar
sylvain
MAACA Death Knight
Posts: 3323
Joined: Thu Nov 19, 2009 7:39 am
Location: Ottawa, Ontario

Re: Spring on stepper unit

Postby sylvain » Sat Feb 09, 2019 8:58 pm

You have to find-out what is binding. Check the advice of novaguy above.

Also make sure all ratchet parts/arms and pivots are lightly lubed and not gummed-up, so that the unit can easily ratchet up and down (or reset) mechanically/manually.
Once the rivets are cleaned, it would be a good idea to put a very tiny amount of EM special contact grease. Contact RAB at Alouette for this.

Good luck!
-Sylvain.
Looking for Bally Star-Jet, Capersville or The Wiggler, Williams Magic City, Grand Lizard, Swords of Fury, 1986 Pinstar Gamatron, and a few others.
Collecting & repairing electro-mechanical and solid state pinball machines with quality and care for over 35 years.
Serious and fun hobby, powerful nostalgia !



Return to “Pinball and Videogame Tech”

Who is online

Users browsing this forum: Fifty, Silverball and 2 guests