Bally Star Trek

Restoration/upgrades/fixes/fabrication of pins and vids
User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Bally Star Trek

Postby steamfitter » Wed Feb 27, 2019 12:33 pm

Bought this a few years ago with plans on restoring it . So far i've bought many new parts like CPR playfield , CPR plastics , boards , Pinball Pimp stencils etc... so i have enough stuff to get started .
Attachments
20180225_092121.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Wed Feb 27, 2019 12:46 pm

I started yesterday , assembled a rectifier board from nvram weebly .com
Today i cleaned the plate , wired the board and installed it .
Attachments
20190227_121039.jpg
20190227_113831.jpg
20190227_113755.jpg
20190227_120746.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Wed Feb 27, 2019 3:51 pm

The playfield is going to be nice to look at once completed
I always start with the lights then ground wire . I also use old play field side rails to elevate playfield .

Always looking for advice ,good or bad .

Denis
Attachments
20190227_153244.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Sat Mar 02, 2019 4:00 pm

Soldering will be a good job with my coffee tomorrow morning.
Did someone say beer time ?
Attachments
20190302_155348.jpg
20190302_155117.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter


User avatar
HPR Pinball
MAACA OG
Posts: 7247
Joined: Thu Sep 16, 2010 4:53 pm
Location: St-Rose, Laval

Re: Bally Star Trek

Postby HPR Pinball » Sat Mar 02, 2019 7:12 pm

Great projet, love the new playfield!
Inventory
Pins: http://www.pinballowners.com/hal-9ooo
Vids: http://www.arcade-museum.com/members/me ... _id=454505
Les arcades, j'suis tombé d'dans quand j'tait pti !! :-)

User avatar
AMX
MAACA Wacko
Posts: 3835
Joined: Thu Nov 19, 2009 12:31 pm
Location: St-Jerome

Re: Bally Star Trek

Postby AMX » Sun Mar 03, 2019 1:28 pm

C'est une belle game, j'ai hate de voir le resultat final!!
Lache pas Denis!
Pinball
Pinball Owners.com/amx1
Jukebox
Seeburg DS, Seeburg AY, Seeburg 222, RockOla 418, AMI E-80
Video
Star Wars + ESB, 1942, 1943, Striker 1945, Arkanoid, Arkanoid Revenge Of Doh, Spy Hunter, Aero Fighters
Arcade
Chicago Coin TV Baseball, Midway Haunted House, Chicago Coin Varsity, United Line Up, United Sure Fire, Bally ABC Tournament

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Sun Mar 03, 2019 3:53 pm

Merci les boys ,
Oui belle game et j aime le game play ( excuse mon franglais ) .

Sa vas etre une aventure

Denis
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
cdnpinballer
MAACA Wacko
Posts: 2717
Joined: Mon Oct 18, 2010 9:48 am
Location: Ottawa, Ontario

Re: Bally Star Trek

Postby cdnpinballer » Sun Mar 03, 2019 4:47 pm

Exciting winter project!! I’ll be following this along. Love these old Bally’s.

Cheers!

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Thu Mar 07, 2019 2:04 pm

So far i have tumbled some part with more in the tumbler . Installed new stand up target and now working on switches . Always best to check how things line up before predrilling holes .
Attachments
20190305_143647.jpg
20190305_170825.jpg
20190305_160049.jpg
20190306_103648.jpg
20190306_102329.jpg
20190306_104136.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Thu Mar 07, 2019 2:05 pm

Mores pics
Attachments
20190306_105307.jpg
20190306_105503.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
redketchup
MAACA Wacko
Posts: 4682
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Contact:

Re: Bally Star Trek

Postby redketchup » Thu Mar 07, 2019 2:19 pm

cool! nice project, i will follow
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Thu Mar 07, 2019 4:34 pm

redketchup didn't you post something on coil wraps ?
You do nice work and others on MAACA I'll have to go on old posts to get ideals. :beerchug

Denis
Last edited by steamfitter on Thu Mar 07, 2019 4:39 pm, edited 1 time in total.
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
cap
MAACA Half-ling
Posts: 937
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Bally Star Trek

Postby cap » Thu Mar 07, 2019 5:15 pm

Inkochnito has many coil wrappers you can print on his site
http://www.pinballrebel.com/pinball/car ... appers.htm
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Thu Mar 07, 2019 6:13 pm

Thanks cap
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
AMX
MAACA Wacko
Posts: 3835
Joined: Thu Nov 19, 2009 12:31 pm
Location: St-Jerome

Re: Bally Star Trek

Postby AMX » Thu Mar 07, 2019 7:41 pm

Denis, as tu refait clearé le pf ou c'est d'origine???
Pinball
Pinball Owners.com/amx1
Jukebox
Seeburg DS, Seeburg AY, Seeburg 222, RockOla 418, AMI E-80
Video
Star Wars + ESB, 1942, 1943, Striker 1945, Arkanoid, Arkanoid Revenge Of Doh, Spy Hunter, Aero Fighters
Arcade
Chicago Coin TV Baseball, Midway Haunted House, Chicago Coin Varsity, United Line Up, United Sure Fire, Bally ABC Tournament

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Thu Mar 07, 2019 8:25 pm

Non c est CPR original
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Sat Mar 09, 2019 10:35 am

So far I've been going through my old parts to try to save as much as I can from the old star trek . I will be making new cabinet and head , this one needs too much TLC . So I'm trying to save it for a friend who also likes projects :FP:
I found all the switches i needed , cleaned then and tested diodes . Drop target bank is a newer style . I use a 3/16 drill bit for pop bumper spoons . I drill it by hand with my fingers with medium pressure .
Attachments
20190308_151350.jpg
20190309_100726.jpg
20190309_100758.jpg
20190309_102435.jpg
20190309_102348.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
mad
MAACA Buck
Posts: 185
Joined: Tue Sep 28, 2010 9:07 am
Location: ville de Québec

Re: Bally Star Trek

Postby mad » Wed Mar 13, 2019 9:46 am

belle pinball à restauré félicitation.

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Sun Mar 17, 2019 8:03 am

I'm back to work so project on hold . i started last monday at Ontario power genaration in Darlington . There reassembling 1 of the turbine and reactor , it's being refurbished to new and will be good for an other 30 to 40 yrs . Being a licence steamfitter i'll be working on the steam system and any pipe related work . Once i finish the acquired training to enter the facilities , i'll be training on a mock up before i do work on the real one . Nuclear work is new to me , it's pretty interesting work . I'll be on a 4 on 4 off schedule and will get back at it on my first 4 days off .

Denis
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
semicolin
MAACA Half-ling
Posts: 773
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Contact:

Re: Bally Star Trek

Postby semicolin » Sun Mar 17, 2019 7:14 pm

That's a long way from home, Denis! But an interesting project nonetheless... lots of electricians on that call but I'm too busy here in Ottawa. Safe travels!

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Sat Jul 27, 2019 1:27 pm

When i got my 8BD this one kinda was left aside . But i have been doing a bit here and there when it's too hot in garage ( the game is in the basement ). It's almost ready for the harness . Has anyone clean there good but dirty coils in the ultrasonic cleaner ?

Denis
Attachments
20190727_141423.jpg
20190727_141345.jpg
20190727_141524.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
HPR Pinball
MAACA OG
Posts: 7247
Joined: Thu Sep 16, 2010 4:53 pm
Location: St-Rose, Laval

Re: Bally Star Trek

Postby HPR Pinball » Sat Jul 27, 2019 10:53 pm

Yeah i put the entire harness with the coils in the ultrasonic, no problem but give it a lot of time to dry, put it under sun for a few days :-)
Inventory
Pins: http://www.pinballowners.com/hal-9ooo
Vids: http://www.arcade-museum.com/members/me ... _id=454505
Les arcades, j'suis tombé d'dans quand j'tait pti !! :-)

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Sun Jul 28, 2019 4:40 am

Merci Max
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
steamfitter
MAACA Half-ling
Posts: 856
Joined: Fri Feb 06, 2015 1:31 pm
Location: Orleans ( Ottawa )
Contact:

Re: Bally Star Trek

Postby steamfitter » Sun Jul 28, 2019 9:08 am

The playfield harness i got didn't come with the coils , I'm going to have to steal some from the old playfield. I put the harness in for over an hour and set it on the fence to dry . I also finished wiring the transformer .
Attachments
20190728_093736.jpg
20190728_093950.jpg
20190728_095812.jpg
20190728_095822.jpg
Pins:Eight Ball Deluxe, Black Hole , Flash Gordon, Black Knight
Jukebox :1972 Seeburg Olympian sps160 , 1986 seeburg SCD-1
Projects : fireball (home edition ) , seeburg LPC-1 , Meteor , star trek , James bond 007

http://WWW.pinballowners.com/steamfitter

User avatar
Manu2
MAACA Buck
Posts: 122
Joined: Fri Oct 15, 2010 1:12 pm

Re: Bally Star Trek

Postby Manu2 » Thu Aug 01, 2019 6:30 am

Why is the special white ? A mistake by CPR ?



Return to “Projects”

Who is online

Users browsing this forum: No registered users and 1 guest