*3D printed parts thread*

Restoration/upgrades/fixes/fabrication of pins and vids
Post Reply
User avatar
necro_nemesis
MAACA OG
Posts: 8597
Joined: Wed Nov 18, 2009 10:32 pm
Location: Within mechanism_8 or simply Newmarket

Re: *3D printed parts thread*

Post by necro_nemesis »

I have a handful of parts to make a few of these (5). Let me know if there’s interest and I’ll figure out a price and post them in classifieds. Clips on the ramp, wires drop through hole and includes crimp splice spade connectors as shown. Yellow led lights with slot machine and internal red led glows with GI. Diodes required are there. The wires are virtually invisible when installed as viewed by player/spectator view angles.
Attachments
8A9F6C6E-AF8D-4EF0-B10A-04E640B13E86.jpeg
E3A0757B-67E3-4DB6-AE25-ED18FF5B3F7A.jpeg
35EF3B52-ECE2-418F-A55A-04D90FED654E.jpeg
F1D0B865-BEC8-4F94-9B17-0D8B0634AB7F.jpeg
E843ED65-8A2A-4438-A1A6-838F83992C23.jpeg
EC620977-4AA4-49A5-8E2C-7F5288F0BAF2.jpeg
BEF42E1D-5670-4CE8-BA2D-A965FE2E17FA.jpeg
Pins: Scared Stiff - Getaway - Funhouse - Twilightzone - No Fear - Attack from Mars - Indiana Jones - Cirqus Voltaire (prototype) - Medieval Madness - Tales of Arabian Nights. Arcades: Robotron (cocktail) - Stargate - Midway Haunted House. Jukes: Seeburg 100c - Seeburg 222.
Rumors of my demise have been greatly exaggerated.
Top
User avatar
necro_nemesis
MAACA OG
Posts: 8597
Joined: Wed Nov 18, 2009 10:32 pm
Location: Within mechanism_8 or simply Newmarket

Re: *3D printed parts thread*

Post by necro_nemesis »

https://www.thingiverse.com/thing:4077070
Attachments
cradle.JPG
Pins: Scared Stiff - Getaway - Funhouse - Twilightzone - No Fear - Attack from Mars - Indiana Jones - Cirqus Voltaire (prototype) - Medieval Madness - Tales of Arabian Nights. Arcades: Robotron (cocktail) - Stargate - Midway Haunted House. Jukes: Seeburg 100c - Seeburg 222.
Rumors of my demise have been greatly exaggerated.
Top
User avatar
Fifty
MAACA Motormouth
Posts: 2209
Joined: Sun Mar 16, 2014 2:50 pm
Location: Ottawa (Kanata)
Has liked: 116 times
Been liked: 10 times

Re: *3D printed parts thread*

Post by Fifty »

Fantastic thread!
Top
User avatar
necro_nemesis
MAACA OG
Posts: 8597
Joined: Wed Nov 18, 2009 10:32 pm
Location: Within mechanism_8 or simply Newmarket

Re: *3D printed parts thread*

Post by necro_nemesis »

Slightly different. Pinball Logos added to the back. Base modified to print without support material.

https://www.thingiverse.com/thing:4078698
Attachments
pinball cradle.JPG
Pins: Scared Stiff - Getaway - Funhouse - Twilightzone - No Fear - Attack from Mars - Indiana Jones - Cirqus Voltaire (prototype) - Medieval Madness - Tales of Arabian Nights. Arcades: Robotron (cocktail) - Stargate - Midway Haunted House. Jukes: Seeburg 100c - Seeburg 222.
Rumors of my demise have been greatly exaggerated.
Top
User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1819
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 8 times
Been liked: 9 times

Re: *3D printed parts thread*

Post by Chnillapoil »

Today I decided to pimp my printer for stand alone mode...
IMG_1276.JPG
IMG_1275.JPG
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)
Top
User avatar
cait001
MAACA Wacko
Posts: 4547
Joined: Tue Oct 09, 2012 3:42 pm
Location: Centretown, Ottawa, ON
Has liked: 21 times
Been liked: 25 times

Re: *3D printed parts thread*

Post by cait001 »

Someone made me this shooter housing for a 1934 machine. Entire shooter mech was missing, so got the housing 3d printed and used reproduction Rockola parts from Buckwerx for the shooter and springs. Perfect fit.
Attachments
20200103_221938.jpg
WANTED: Jezzard Mini Cascade, 21 by Duval / Klix by Groetchen etc, Steeple Chase (Kaye, Irving & Co) / Skill Horses / Skill Jump (Groetchen)
backglasses wanted: Star-Jet, Fire Queen, Fairy, Star Trek (1971 Gottlieb)
marquees wanted: Roller Aces, Quiz Dragon, Strider, Varkon, Dark Planet, R-Type (w/ship), Quantum, Ninja (Sega)
blog -- collection -- Pinball Women Ottawa -- Ottawa Pinball Map -- ratings
Top
User avatar
Fifty
MAACA Motormouth
Posts: 2209
Joined: Sun Mar 16, 2014 2:50 pm
Location: Ottawa (Kanata)
Has liked: 116 times
Been liked: 10 times

Re: *3D printed parts thread*

Post by Fifty »

cait001 wrote:Someone made me this shooter housing for a 1934 machine. Entire shooter mech was missing, so got the housing 3d printed and used reproduction Rockola parts from Buckwerx for the shooter and springs. Perfect fit.
Wow! It looks great Cait!
Top
User avatar
Mindstorm88
MAACA Millennial
Posts: 1285
Joined: Sat Nov 21, 2009 9:41 am
Location: Varennes, Qc
Has liked: 5 times
Been liked: 8 times

Re: *3D printed parts thread*

Post by Mindstorm88 »

Chnillapoil wrote:Today I decided to pimp my printer for stand alone mode...
IMG_1276.JPGIMG_1275.JPG
me semble j ai deja vu ca quelques part :D :D
Top
User avatar
eh97ac
MAACA Half-ling
Posts: 533
Joined: Sun Dec 05, 2010 11:41 am
Location: Milton
Has liked: 5 times
Been liked: 1 time

Re: *3D printed parts thread*

Post by eh97ac »

Printed parts arrived and fit like a glove.
IMG_20200109_145216.jpg
IMG_20200109_145222.jpg
IMG_20200109_145238.jpg
Top
User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1819
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 8 times
Been liked: 9 times

Re: *3D printed parts thread*

Post by Chnillapoil »

Wow look good !!
Great job !
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)
Top
User avatar
eh97ac
MAACA Half-ling
Posts: 533
Joined: Sun Dec 05, 2010 11:41 am
Location: Milton
Has liked: 5 times
Been liked: 1 time

Re: *3D printed parts thread*

Post by eh97ac »

Thanks again for the great pieces. I am going to be doing a FP playfield swap and these will just be one of the nice touches I'll be adding.
Top
User avatar
Sparky
MAACA OG
Posts: 23309
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL
Has liked: 2 times
Been liked: 77 times

Re: *3D printed parts thread*

Post by Sparky »

Wow... 20 years in this hobby and I still find myself amazed by progress.

Those posts are awesome. I may need some as well for Flight 2000... any chance in blue? ;)
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349
Top
User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1819
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 8 times
Been liked: 9 times

Re: *3D printed parts thread*

Post by Chnillapoil »

Sparky wrote:Wow... 20 years in this hobby and I still find myself amazed by progress.

Those posts are awesome. I may need some as well for Flight 2000... any chance in blue? ;)
How many do you need ?
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)
Top
User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1819
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 8 times
Been liked: 9 times

Re: *3D printed parts thread*

Post by Chnillapoil »

I published the Stern power switch cover on Thingiverse.

https://www.thingiverse.com/thing:4168615

If you need some already printed it's 5$ + shipping.

Enjoy !
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)
Top
User avatar
Sparky
MAACA OG
Posts: 23309
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL
Has liked: 2 times
Been liked: 77 times

Re: *3D printed parts thread*

Post by Sparky »

Here is an easy one. I just visited an arcade and they had this on the coindoors:

https://www.thingiverse.com/thing:2085416/comments

I actually bought 7 of them from the arcade directly. LOL

But I would install those in all my machines.
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349
Top
User avatar
Sparky
MAACA OG
Posts: 23309
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL
Has liked: 2 times
Been liked: 77 times

Re: *3D printed parts thread*

Post by Sparky »

Chnillapoil wrote:
Sparky wrote:Wow... 20 years in this hobby and I still find myself amazed by progress.

Those posts are awesome. I may need some as well for Flight 2000... any chance in blue? ;)
How many do you need ?
Sorry, I didn't see the response.

I will count them when I get home.
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349
Top
User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1819
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 8 times
Been liked: 9 times

Re: *3D printed parts thread*

Post by Chnillapoil »

Quarantine project
056D9E40-368A-41A3-8C93-70BDA3833F75.jpeg
Last edited by Chnillapoil on Sun Mar 22, 2020 8:52 pm, edited 1 time in total.
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)
Top
User avatar
AMX
MAACA Wacko
Posts: 3881
Joined: Thu Nov 19, 2009 12:31 pm
Location: St-Jerome
Has liked: 7 times
Been liked: 8 times

Re: *3D printed parts thread*

Post by AMX »

Chnillapoil wrote:Quanrantine project056D9E40-368A-41A3-8C93-70BDA3833F75.jpeg
Ça c'est vraiment cooool!!!
Pinball
Pinball Owners.com/amx1
Jukebox
Seeburg DS, Seeburg AY, Seeburg 222, RockOla 418, AMI E-80
Video
Star Wars + ESB, 1942, 1943, Striker 1945, Arkanoid, Arkanoid Revenge Of Doh, Spy Hunter, Aero Fighters
Arcade
Chicago Coin TV Baseball, Midway Haunted House, Chicago Coin Varsity, United Line Up, United Sure Fire, Bally ABC Tournament
Top
User avatar
Fifty
MAACA Motormouth
Posts: 2209
Joined: Sun Mar 16, 2014 2:50 pm
Location: Ottawa (Kanata)
Has liked: 116 times
Been liked: 10 times

Re: *3D printed parts thread*

Post by Fifty »

Chnillapoil wrote:Quanrantine project056D9E40-368A-41A3-8C93-70BDA3833F75.jpeg
Thank looks fricken sweet!
Top
User avatar
ballyhoo
MAACA Buck
Posts: 238
Joined: Sun Sep 19, 2010 9:09 am
Location: St-Romuald, Quebec, Canada, Terre
Contact:
Contact ballyhoo

Re: *3D printed parts thread*

Post by ballyhoo »

Vraiment Nice! Il ne reste qu'a lui mettre une couche de peinture chrome et hop! Il va troner sur mon ampli de guitare de Heavy Metal Meltdown.
Beau travail mon ami!!!
Cyclone - Heavy Metal Meltdown - Nitro Ground Shaker - Pinbot - Close Encounters - Pinball Pool - Bride of Pinbot - TAXI - NARC(mame) - Sega Mini Turbo - Sega Mini Monaco GP - Robotron - Warlords (cocktail)

"L'ennui en ce monde est que les imbéciles sont sûr d'eux et les gens sensés pleins de doutes"
Top
User avatar
ballyhoo
MAACA Buck
Posts: 238
Joined: Sun Sep 19, 2010 9:09 am
Location: St-Romuald, Quebec, Canada, Terre
Contact:
Contact ballyhoo

Re: *3D printed parts thread*

Post by ballyhoo »

Merci pour ton incroyable travail! Voilà qui va donner une touche vraiment unique a une machine que j'affectionne particulièrement. Dans le monde particulier des 6803 la HMM est selon moi unique. Un gameplay simple. Un multiball décadent et un environnement sonore unique. Il manquait le topper sur ma nouvelle acquisition... J 'ai déjà eu la machine en 1989 et je trouvais le topper original plutôt guenille. Rien n'arrive pour rien... Sur ma nouvelle HMM j'ai la chance de pouvoir recréer le topper d'origine. Je me lâche lousse! 150 watts de son, tubes contrôlés et flammes... Manquait que le Bally... Merci à toi pour ce beau print!
Attachments
received_217475722657888.jpeg
received_255829128909714.jpeg
Cyclone - Heavy Metal Meltdown - Nitro Ground Shaker - Pinbot - Close Encounters - Pinball Pool - Bride of Pinbot - TAXI - NARC(mame) - Sega Mini Turbo - Sega Mini Monaco GP - Robotron - Warlords (cocktail)

"L'ennui en ce monde est que les imbéciles sont sûr d'eux et les gens sensés pleins de doutes"
Top
User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1819
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 8 times
Been liked: 9 times

Re: *3D printed parts thread*

Post by Chnillapoil »

Hey fais plaisir !!
J'ai parlé à RAB aujourd'hui et on a parlé de toi justement, J'espère qu'on va pouvoir se rencontrer un moment donné après tout ça.
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)
Top
pharoah007

Re: *3D printed parts thread*

Post by pharoah007 »

Chnillapoil wrote:Quarantine project056D9E40-368A-41A3-8C93-70BDA3833F75.jpeg
now add a Williams, DE and Stern!
Top
User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1819
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 8 times
Been liked: 9 times

Re: *3D printed parts thread*

Post by Chnillapoil »

pharoah007 wrote:
Chnillapoil wrote:Quarantine project056D9E40-368A-41A3-8C93-70BDA3833F75.jpeg
now add a Williams, DE and Stern!
If there is need, I could do it !


Today I made a replica of a gear for my son:
IMG_1447.JPG
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)
Top
User avatar
mad
MAACA Buck
Posts: 230
Joined: Tue Sep 28, 2010 9:07 am
Location: ville de Québec
Been liked: 1 time

Re: *3D printed parts thread*

Post by mad »

Vraiment impressionnent se que tu fait avec ton imprimante 3D Alain.
bon travaille. :thumbup
Top
Post Reply

Return to “Projects”