Since 3d printers are more and more accurate and much more cheaper to acquire, I would like to start a thread for people who are looking for almost impossible to find plastic parts(pinball related).
I'm sure there is some designers here who would like to share their skills with others. I use to print some Williams target guides for a friend and they were sturdier than the originals.
Thingiverse is a very good source for this but I think MAACA would be a good place to discuss about that and share some knowledge.
We had printed Bally p/n P-7939-1 ( Nut & spring Bracket) for North Star's Dolly Parton when we were in a pinch. Worked great. Couldn't find it anywhere,then I found a bunch at Alouette after we printed it, so we have that file somewhere.
Regardless, I think this is a good thread Chnill, but if I can make the suggestion to use part numbers under the pics so there is less chance of an error. Believe me alot of parts look like what you may need in a picture, but without part numbers you can't be sure.
Hugs,
Rob
Last edited by R.A.B. on Mon Nov 25, 2019 9:03 am, edited 1 time in total.
Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.
A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.
P.S. Some of us need something to do besides contemplate how important everyone has suddenly become in a world of exaggerated self-promotion upheld by the new dumb.
R.A.B. wrote:
Regardless, I think this is a good thread Chnill, but if I can make the suggestion to use part numbers so there is less chance of an error. Beliveve me alot of parts look like what you may need in a picture, but without part numbers you can't be sure.
Hugs,
Rob
Merci Robert j’en prend bonne note
HIGHSPEED1986 PIN*BOT 1986 TAXI 1988 OLD CHICAGO 1976 MAME MARIO BROS 1983 EIGHT BALL DELUXE LE 1982 FATHOM 1980 MS PACMAN (cocktail project) GTB GENESIS (project)
OMG, I can think of quite a few... But I would also include any part that is beyond expensive due to shipping from the US. One that comes to mind is the plastic slide bracket for early SS Williams drop target units. It is a plastic part on which the drop target "contact boards" are screwed onto. 30+ years later, the screwholes crumble. A big pain in the ass.
Dr.Dude "Big Shot" figurine... One sold for 150$US on Ebay, and another was listed at 1000$US. LOL
Freddy glove flipper...
Heck, even custom flipper bats.
I am sure that people will chime in with their own little discontinued plastic part that is dead and needs replacing.
Me? I would only need simpler non-critical things, such as the drop-target light shield for Rolling Stones. The original is a vacuum-formed POS.
Sparky wrote:OMG, I can think of quite a few... But I would also include any part that is beyond expensive due to shipping from the US. One that comes to mind is the plastic slide bracket for early SS Williams drop target units. It is a plastic part on which the drop target "contact boards" are screwed onto. 30+ years later, the screwholes crumble. A big pain in the ass.
Me? I would only need simpler non-critical things, such as the drop-target light shield for Rolling Stones. The original is a vacuum-formed POS.
The first picture is the Williams drop target unit you’re talking about.
Bring me your old light shield friday, very easy to make.
HIGHSPEED1986 PIN*BOT 1986 TAXI 1988 OLD CHICAGO 1976 MAME MARIO BROS 1983 EIGHT BALL DELUXE LE 1982 FATHOM 1980 MS PACMAN (cocktail project) GTB GENESIS (project)
Sparky wrote:OMG, I can think of quite a few... But I would also include any part that is beyond expensive due to shipping from the US. One that comes to mind is the plastic slide bracket for early SS Williams drop target units. It is a plastic part on which the drop target "contact boards" are screwed onto. 30+ years later, the screwholes crumble. A big pain in the ass.
Me? I would only need simpler non-critical things, such as the drop-target light shield for Rolling Stones. The original is a vacuum-formed POS.
The first picture is the Williams drop target unit you’re talking about.
Bring me your old light shield friday, very easy to make.
I need some things for my telescope. To replace duct tape
What's the biggest surface you can print? Something about 5inch diameter ok? I think is 5inch or so.
Splitskull wrote:I need some things for my telescope. To replace duct tape
What's the biggest surface you can print? Something about 5inch diameter ok? I think is 5inch or so.
Un cover pour la switch des classic stern... il y a deja un americain qui les fabrique, mais si on peut les faire locale, j'en prendrais 6!
Attachments
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I To see it: http://www.pinballowners.com/redketchup
I'm willing to print some test stuff for anyone as long as you provide the file and pay for shipping. My printer is resin (DLP) so the print volume is a tad small. 115mm x 65mm x 155mm. But the resolution is awesome and you don't get print lines.
The resin has a shelf life of about 1 year and I am near that so free printing!
I can print clear (new 1 L bottle), and have a little bit of opaque gray left.
Cheers,
Current Lineup:
PINS: Medieval Madness Royal Edition - Mods: Merlin, Troll lighting Stern Jurassic Park LE - Pinstadiums, Stern topper, mods: signs, watch tower, raptor pen, T-rex fence, pteranodon, and a few more Wizard of Oz ECLE - Mods: witch, tornado, castle, crystal ball, emerald city, flaming pots, hot air balloon lighting Star Trek the Next Generation - Alt translite, Pinstadiums, Pinsound board & speakers, full LED, LED&GI OCD, custom topper, ColorDMD Doctor Who - Alt Translite, moving Dalek, full LED, Pinsound & shaker, LED&GI OCD, ColorDMD Revenge from Mars - Running custom v2.21 on original hardware, Mods: saucer LEDs, 6-ball trough, knocker, shaker
Looking for:
Stern SW Prem/LE
Willy Wonka
LOTR
JUKES
Rock-Ola 446 - Up and running. Listed on Kijiji/FB.
Seeburg STD2 Entertainer - Converted to MP3 while retaining the original look and feel.
Gone but not forgotten
So many... Road Show, Monster Bash, Twilight Zone, Lord of the Rings, Simpsons Pinball Party, Demolition Man, Terminator 2, Funhouse, Tales from the Crypt, High Speed, Bad Cats, Flintstones, WWF Royal Rumble, Laser War, Laser Ball, Silver Slugger, Batman Forever, Pinbot, 6 Million Dollar Man, Galaxy, Meteor, Countdown, Hot Tip(SS), and others I just can't think of lol.
Here’s some examplesnof stuff I printed for shits and giggles.
Attachments
Current Lineup:
PINS: Medieval Madness Royal Edition - Mods: Merlin, Troll lighting Stern Jurassic Park LE - Pinstadiums, Stern topper, mods: signs, watch tower, raptor pen, T-rex fence, pteranodon, and a few more Wizard of Oz ECLE - Mods: witch, tornado, castle, crystal ball, emerald city, flaming pots, hot air balloon lighting Star Trek the Next Generation - Alt translite, Pinstadiums, Pinsound board & speakers, full LED, LED&GI OCD, custom topper, ColorDMD Doctor Who - Alt Translite, moving Dalek, full LED, Pinsound & shaker, LED&GI OCD, ColorDMD Revenge from Mars - Running custom v2.21 on original hardware, Mods: saucer LEDs, 6-ball trough, knocker, shaker
Looking for:
Stern SW Prem/LE
Willy Wonka
LOTR
JUKES
Rock-Ola 446 - Up and running. Listed on Kijiji/FB.
Seeburg STD2 Entertainer - Converted to MP3 while retaining the original look and feel.
Gone but not forgotten
So many... Road Show, Monster Bash, Twilight Zone, Lord of the Rings, Simpsons Pinball Party, Demolition Man, Terminator 2, Funhouse, Tales from the Crypt, High Speed, Bad Cats, Flintstones, WWF Royal Rumble, Laser War, Laser Ball, Silver Slugger, Batman Forever, Pinbot, 6 Million Dollar Man, Galaxy, Meteor, Countdown, Hot Tip(SS), and others I just can't think of lol.
redketchup wrote:Un cover pour la switch des classic stern... il y a deja un americain qui les fabrique, mais si on peut les faire locale, j'en prendrais 6!
Fafa...apporte un exemplaire si tu vas au Timeout
HIGHSPEED1986 PIN*BOT 1986 TAXI 1988 OLD CHICAGO 1976 MAME MARIO BROS 1983 EIGHT BALL DELUXE LE 1982 FATHOM 1980 MS PACMAN (cocktail project) GTB GENESIS (project)
redketchup wrote:Un cover pour la switch des classic stern... il y a deja un americain qui les fabrique, mais si on peut les faire locale, j'en prendrais 6!
Fafa...apporte un exemplaire si tu vas au Timeout
C'est ça le problème... je n'ai pas d'exemplaire...
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I To see it: http://www.pinballowners.com/redketchup
Chnillapoil wrote:As-tu quelques mesures? Entre les vis ?la hauteur?
oui, je te reviens avec ca ce soir
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I To see it: http://www.pinballowners.com/redketchup
mrmikeman wrote:I'm willing to print some test stuff for anyone as long as you provide the file and pay for shipping. My printer is resin (DLP) so the print volume is a tad small. 115mm x 65mm x 155mm. But the resolution is awesome and you don't get print lines.
The resin has a shelf life of about 1 year and I am near that so free printing!
I can print clear (new 1 L bottle), and have a little bit of opaque gray left.
Cheers,
Good !
That's the magic of this hobby. Welcome to this thread!
HIGHSPEED1986 PIN*BOT 1986 TAXI 1988 OLD CHICAGO 1976 MAME MARIO BROS 1983 EIGHT BALL DELUXE LE 1982 FATHOM 1980 MS PACMAN (cocktail project) GTB GENESIS (project)
