Pincon 2018 Parts Pre-Orders

Talk about anything that you would like.
User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Mon May 14, 2018 7:40 am

Hello Folks.

Please let me know if you need me to bring any specific parts to PinCon 2018. I have access to lots of coils, not just where I work, they just seem to be everywhere I go these days. Lots of oddball stuff.

I am already bringing the common stuff and some curiosities of my choice. This should be weird enough to get us talking crazy pinball and video stuff.

Let me know if you have any specific parts requests other than bulbs, bolts, balls, locks etc.

You can post suggestions here and/or PM me your requests.

Thanks in advance.

Rob
Last edited by R.A.B. on Fri May 18, 2018 9:52 am, edited 3 times in total.
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
Sparky
MAACA Dark Lord
Posts: 22248
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL

Re: Pincon 2018 Parts Pre-Orders

Postby Sparky » Mon May 14, 2018 7:43 am

4 old-style leg bolt plates, 2 flipper switches and 8 EOS switches for a classic Bally (like Power Play)? Heck, I can come over today and pick the parts up. I have a 4pm flight to Edmonton. I can stop by around lunchtime.
Now playing in Sparky's Power Station: Way too much shit...

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Mon May 14, 2018 7:47 am

Sparky wrote:4 old-style leg bolt plates, 2 flipper switches and 8 EOS switches for a classic Bally (like Power Play)? Heck, I can come over today and pick the parts up. I have a 4pm flight to Edmonton. I can stop by around lunchtime.


Sure, stop in.

Problem is that I may not be able to fill your order above at 100% since I have not started doing purchasing yet, just moving all the crazy stuff that is here.
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
Dave W.
MAACA Mage
Posts: 354
Joined: Sun Dec 12, 2010 11:20 pm
Location: Montreal (Ile Perrot)

Re: Pincon 2018 Parts Pre-Orders

Postby Dave W. » Mon May 14, 2018 9:08 am

Hi Rob,
If you have, can you please bring:

1 X FLIPPER REBUILD KIT WILLIAMS FLIPTRONIC
REF # A-13524-8

1 X COIL AE26-1200 WILLIAMS
REF # AE-26-1200

25 X FOAM PROTECT PADS 3/8" W x 3/4"
REF # 23-6534-9

Thanks!!


User avatar
Chris Silver
MAACA Death Knight
Posts: 2828
Joined: Thu Jul 28, 2011 8:41 pm
Location: Hawkesbury, Nowhere Ontario

Re: Pincon 2018 Parts Pre-Orders

Postby Chris Silver » Mon May 14, 2018 11:31 am

Dave W. wrote:Hi Rob,
If you have, can you please bring:

1 X FLIPPER REBUILD KIT WILLIAMS FLIPTRONIC
REF # A-13524-8

1 X COIL AE26-1200 WILLIAMS
REF # AE-26-1200

25 X FOAM PROTECT PADS 3/8" W x 3/4"
REF # 23-6534-9

Thanks!!


Robert, see if you can hook him up with something to stop the ball from draining between the flippers. ;)
Pins: Lightning, Af-Tor, Embryon, Black Hole, Elektra, Stellar Wars, 8 Ball Deluxe LE, Timeline, Silverball Mania
Vids: Double Dragon 619-1
Gone: Space Station, Top Score, Flash Gordon, Solar Fire, Haunted House, Fire (x2), Vector, Bally Playboy, Tropic Isle, Beat the Clock, Blue-Chip
WTB: Punk!, Black Knight, Spirit, Cosmic Gunfight, Barracora, Medusa
Its better to have played and lost than never to have played at all.

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Mon May 14, 2018 11:41 am

Chris Silver wrote:
Dave W. wrote:Hi Rob,
If you have, can you please bring:

1 X FLIPPER REBUILD KIT WILLIAMS FLIPTRONIC
REF # A-13524-8

1 X COIL AE26-1200 WILLIAMS
REF # AE-26-1200

25 X FOAM PROTECT PADS 3/8" W x 3/4"
REF # 23-6534-9

Thanks!!


Robert, see if you can hook him up with something to stop the ball from draining between the flippers. ;)


Done. I texted Dave.
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
cait001
MAACA Death Knight
Posts: 3610
Joined: Tue Oct 09, 2012 3:42 pm
Location: Centretown, Ottawa, ON

Re: Pincon 2018 Parts Pre-Orders

Postby cait001 » Mon May 14, 2018 9:05 pm

If I said "Gottlieb Sure Shot rubbers kit" would that be enough or should I send you the list?
PINS: GTB Super Soccer (lent), GTB Sure Shot (loan), BLY Mousin' Around, WMS No Good Gofers, WMS Triple Strike (loan)
COUNTERTOP: 1975 Satomi Arrangeball, 1930 Fields Five Jacks, 1931 Paces Base Ball, 1931 Paces Whiz Ball, 1932 BLY Goofy, 1978 Haiwa Pachinko
WANTED: 1930s bagatelles, スマートボール (Smart Ball), payazzo/kronespill, Bell-Fruit Cascade
backglasses wanted: Fairy, Fire Queen, Out Of Sight
marquees wanted: Strider, Astro Invader, R-Type (w/ship)
Pinball Women Ottawa -- Ottawa Pinball Map -- repair blog -- game ratings

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Tue May 15, 2018 12:26 pm

cait001 wrote:If I said "Gottlieb Sure Shot rubbers kit" would that be enough or should I send you the list?


It's your call Cait.
If you want to PM me the sizes and quantities of each rubber rings needed (using inside diameter or GTB part numbers) I can put it together for you. Or I can just order it for your pre-packed. 1st option is a little less expensive.

Rob
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
uncleboo
MAACA Mage
Posts: 264
Joined: Sat Sep 18, 2010 9:45 pm
Location: Ottawa

Re: Pincon 2018 Parts Pre-Orders

Postby uncleboo » Tue May 15, 2018 5:53 pm

Hey Rob

I need 3 pop bumper spoons for my eightball deluxe if you have any ?.

Looking forward to seeing you buddy :)

Thanks

Dwight
Pins
STERN SPIDER-MAN , FISH TALES, EBD 1st Edition ,SKYJUMP

http://www.pinballowners.com/uncleboo

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Wed May 16, 2018 6:31 am

uncleboo wrote:Hey Rob

I need 3 pop bumper spoons for my eightball deluxe if you have any ?.

Looking forward to seeing you buddy :)

Thanks

Dwight


Will do Uncleboo.

See ya soon.

Rob
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
4eyes
MAACA Collaborator
Posts: 204
Joined: Fri Sep 17, 2010 8:40 am
Location: Ottawa, On

Re: Pincon 2018 Parts Pre-Orders

Postby 4eyes » Fri May 18, 2018 9:06 am

Rob,
I could use a half dozen WPC pop bumper spoons too if ya got em

Thanks
Kevin
AFM, STTNG, TZ, TOM, FH, WW, TAF, JP, EBD, DISE

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Fri May 18, 2018 9:22 am

4eyes wrote:Rob,
I could use a half dozen WPC pop bumper spoons too if ya got em

Thanks
Kevin


White plastic spoons are p/n 03-7395.

Same as Uncleboo.

OK
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
Pinball Junkie
MAACA Mage
Posts: 406
Joined: Sun Sep 19, 2010 7:20 am
Location: Kanata, Ottawa.

Re: Pincon 2018 Parts Pre-Orders

Postby Pinball Junkie » Fri May 18, 2018 10:22 am

4eyes wrote:Rob,
I could use a half dozen WPC pop bumper spoons too if ya got em

Thanks
Kevin


Same for me Rob.

Thank you,
Frank
Collection: SM(Stn),T2,HS2,CFTBL,GZ,WW,EB,8BD,MM

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Fri May 18, 2018 11:59 am

Pinball Junkie wrote:
4eyes wrote:Rob,
I could use a half dozen WPC pop bumper spoons too if ya got em

Thanks
Kevin


Same for me Rob.

Thank you,
Frank


I will see what I can do Frank.
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
tom_454
MAACA Barbarian
Posts: 917
Joined: Thu Sep 16, 2010 7:13 pm
Location: Ottawa

Re: Pincon 2018 Parts Pre-Orders

Postby tom_454 » Fri May 18, 2018 2:25 pm

Yes, I could also use 4 Williams pop-bumper spoons and some (4) stern playfield magnet core plugs (530-5320-00).
Pinball Rocks!
277 old posts - member since August 2007.

User avatar
cait001
MAACA Death Knight
Posts: 3610
Joined: Tue Oct 09, 2012 3:42 pm
Location: Centretown, Ottawa, ON

Re: Pincon 2018 Parts Pre-Orders

Postby cait001 » Fri May 18, 2018 9:31 pm

WHY THE SUDDEN RUSH ON SPOONS???
PINS: GTB Super Soccer (lent), GTB Sure Shot (loan), BLY Mousin' Around, WMS No Good Gofers, WMS Triple Strike (loan)
COUNTERTOP: 1975 Satomi Arrangeball, 1930 Fields Five Jacks, 1931 Paces Base Ball, 1931 Paces Whiz Ball, 1932 BLY Goofy, 1978 Haiwa Pachinko
WANTED: 1930s bagatelles, スマートボール (Smart Ball), payazzo/kronespill, Bell-Fruit Cascade
backglasses wanted: Fairy, Fire Queen, Out Of Sight
marquees wanted: Strider, Astro Invader, R-Type (w/ship)
Pinball Women Ottawa -- Ottawa Pinball Map -- repair blog -- game ratings

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Fri May 18, 2018 9:38 pm

cait001 wrote:WHY THE SUDDEN RUSH ON SPOONS???


I reckon that it is about that time when the skirt stems have finally made their way through the center of the spoons, leaving a hole in the middle of it all and resulting in poor pop bumper action. It tends to happen suddenly and in the best families and all at once simply by the force of things. We need spoons !!

I think I am out of stock on those now. Cheapest is Marco, so I will get more after PinCon.

I will close the Pinball Resource purchase order on Wednesday morning so as to get it Friday, giving us a little leeway before Pincon, so please let me know what you need.
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
Chnillapoil
MAACA Warrior
Posts: 1605
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval

Re: Pincon 2018 Parts Pre-Orders

Postby Chnillapoil » Sat May 19, 2018 3:51 pm

Old_Chicago.pdf
(615.18 KiB) Downloaded 11 times


Salut Robert, j'ai besoin d'un kit de robert pour ma Old Chicago voir le pdf attaché.... oups kit de rubbers je voulais dire ;)
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
VOLLEY 1976
MAME MARIO BROS 1983
RACER BY MIDWAY 1975
FATHOM 1980
MS PACMAN (cocktail project)

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Sat May 19, 2018 4:02 pm

Chnillapoil wrote:Old_Chicago.pdf

Salut Robert, j'ai besoin d'un kit de robert pour ma Old Chicago voir le pdf attaché.... oups kit de rubbers je voulais dire ;)


Hey mon chum, tu sais que les playfield charts dans les manuels sont souvent pas complet, il manque les 5/16", et le shooter tip etc.
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
Chnillapoil
MAACA Warrior
Posts: 1605
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval

Re: Pincon 2018 Parts Pre-Orders

Postby Chnillapoil » Sat May 19, 2018 4:08 pm

R.A.B. wrote:
Chnillapoil wrote:Old_Chicago.pdf

Salut Robert, j'ai besoin d'un kit de robert pour ma Old Chicago voir le pdf attaché.... oups kit de rubbers je voulais dire ;)


Hey mon chum, tu sais que les playfield charts dans les manuels sont souvent pas complet, il manque les 5/16", et le shooter tip etc.


OK je check ça et je te donnerai le numero du coil que j'ai besoin en même temps
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
VOLLEY 1976
MAME MARIO BROS 1983
RACER BY MIDWAY 1975
FATHOM 1980
MS PACMAN (cocktail project)

User avatar
Chnillapoil
MAACA Warrior
Posts: 1605
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval

Re: Pincon 2018 Parts Pre-Orders

Postby Chnillapoil » Sat May 19, 2018 6:58 pm

Chnillapoil wrote:
R.A.B. wrote:
Chnillapoil wrote:Old_Chicago.pdf

Salut Robert, j'ai besoin d'un kit de robert pour ma Old Chicago voir le pdf attaché.... oups kit de rubbers je voulais dire ;)


Hey mon chum, tu sais que les playfield charts dans les manuels sont souvent pas complet, il manque les 5/16", et le shooter tip etc.


OK je check ça et je te donnerai le numero du coil que j'ai besoin en même temps


Le coil c'est G-33-2800 et j'ai besoin de 16 rubbers 5/16 de plus.

Merci!
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
VOLLEY 1976
MAME MARIO BROS 1983
RACER BY MIDWAY 1975
FATHOM 1980
MS PACMAN (cocktail project)

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Sat May 19, 2018 7:05 pm

Chnillapoil wrote:
Chnillapoil wrote:
R.A.B. wrote:
Chnillapoil wrote:Old_Chicago.pdf

Salut Robert, j'ai besoin d'un kit de robert pour ma Old Chicago voir le pdf attaché.... oups kit de rubbers je voulais dire ;)


Hey mon chum, tu sais que les playfield charts dans les manuels sont souvent pas complet, il manque les 5/16", et le shooter tip etc.


OK je check ça et je te donnerai le numero du coil que j'ai besoin en même temps


Le coil c'est G-33-2800 et j'ai besoin de 16 rubbers 5/16 de plus.

Merci!


Tabarnac, c'est quoi cette bebite de coil la ? Bally je crois, mais ca sert a quoi ? Relay coil ? Fonction SVP
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
Chnillapoil
MAACA Warrior
Posts: 1605
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval

Re: Pincon 2018 Parts Pre-Orders

Postby Chnillapoil » Sat May 19, 2018 7:06 pm

LOCK coil
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
VOLLEY 1976
MAME MARIO BROS 1983
RACER BY MIDWAY 1975
FATHOM 1980
MS PACMAN (cocktail project)

User avatar
R.A.B.
MAACA Death Knight
Posts: 2833
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Contact:

Re: Pincon 2018 Parts Pre-Orders

Postby R.A.B. » Sat May 19, 2018 7:09 pm

Chnillapoil wrote:LOCK coil


OK. J'ai ca dans mon locker, 5 paistres au North Star. :D
http://www.montrealpinball.com
http://www.northstarpinball.com

Maxed out at 10 machines, no more no less. Toujours a 10 machines, pas moins pas plus.
Une règle suivi gueri de tout. A rule respected can cure anything.

A philosophy of doing shall rule til the days when I can no longer "do" arrive. Because when I am too old to wipe my own ass, adjust an AX relay or relieve a woman from sighing, there will be only memories to fill my time. So, the task at hand is to build a RRSP of memories, come hell or calm tides.

User avatar
Chnillapoil
MAACA Warrior
Posts: 1605
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval

Re: Pincon 2018 Parts Pre-Orders

Postby Chnillapoil » Sat May 19, 2018 7:11 pm

R.A.B. wrote:
Chnillapoil wrote:LOCK coil


OK. J'ai ca dans mon locker, 5 paistres au North Star. :D


Je sais que le lock c'est pas une fonction nécessaire mais à 5$ ça fait mon affaire :D
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
VOLLEY 1976
MAME MARIO BROS 1983
RACER BY MIDWAY 1975
FATHOM 1980
MS PACMAN (cocktail project)



Return to “MAACA Forum and Chat”

Who is online

Users browsing this forum: No registered users and 7 guests