What did you do today in the hobby?
Re: What did you do today?
Installed most of the parts back on the Surf Champ playfield. Pretty much finished off reworking one of the broken plastics in paint.
Pins - http://www.pinballowners.com/snazzy81
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Re: What did you do today?
Re-assembled Surf Champ playfield, need to pick up ring kit & some green ball guides for the top and make the two broken plastics.
Pins - http://www.pinballowners.com/snazzy81
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
- Cobra99
- MAACA Mega Contributor
- Posts: 1327
- Joined: Thu Nov 19, 2009 2:01 pm
- Location: Calgary, Alberta
Re: What did you do today?
replaced bridges BR1 and BR2 on my TZ No more resets...
My Collection
Terminator 2.....Hyperball.....Iron Man.....Transformers Autobot LE #48 of 125
Theater of Magic.....RFM(NUCORE).....Twilight Zone.....TRON LE #74
Lord Of the Rings.....Terminator 3.....Family Guy.....The Simpsons Pinball Party
Stern-Spider Man.....MMRLE(On Order).....Predator #43.....SWE1(Playfield)
Gone and will be missed
DH
STTNG
Taxi
JD
JM
Pinball Owners collection http://www.pinballowners.com/cobra99
See my Games room section
For Sale/Trade
Hyperball
****Wanted****
MM
Flintstones
Terminator 2.....Hyperball.....Iron Man.....Transformers Autobot LE #48 of 125
Theater of Magic.....RFM(NUCORE).....Twilight Zone.....TRON LE #74
Lord Of the Rings.....Terminator 3.....Family Guy.....The Simpsons Pinball Party
Stern-Spider Man.....MMRLE(On Order).....Predator #43.....SWE1(Playfield)
Gone and will be missed
DH
STTNG
Taxi
JD
JM
Pinball Owners collection http://www.pinballowners.com/cobra99
See my Games room section
For Sale/Trade
Hyperball
****Wanted****
MM
Flintstones
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: What did you do today?
Change a fuse in my Wurlitzer 1900 and It come back!
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- TwilightZone
- MAACA Mega Contributor
- Posts: 4622
- Joined: Thu Nov 19, 2009 9:08 am
- Location: Ottawa
- Has liked: 16 times
- Been liked: 38 times
- Contact:
Re: What did you do today?
Finally decided to do some things I had been meaning to get to. Couldn't make OPL yesterday, wife is working and no baby sitter, so I decided to work on the pins. Kids were happy, they got to play video games for a few hours without Dad telling them to clean up, let's go for a walk, etc.
So....
Finally got to setting the basement back up.
1. Set Elvis up, had to adjust a switch as the left flipper was weak. Adjusted, played, adjusted, got it right, got a nice score and remembered why this game is so awesome.
2. Set up 4 Million BC. Played a few games. Had stored it for a few months. Needs one switch adjusted, but otherwise plays great.
3. Fixed a switch on T3. Played a few games, now plays perfect.
4. Right flipper was weak on Funhouse. I had been considering selling it. Replaced the stopper and played a few games. Nope, not selling it. What a great game. I love when you get a Jackpot and Rudy goes apeshit. What an incredible toy!
5. Shadow was having some strange issues with the upper playfield. Played a few games and pocked around. Seems to be playing fine now.
6. Moved Slugfest and Hotshots, plugged them in and played a few games.
The basement is finally coming back. Next, shaker motor in Spiderman -- only had that since November , fix upper flipper on No Fear, trouble shoot STNG and then finally get to WCS. Oh and there's a Road Show to fix and Fireball is spitting out two balls -- probably just switch adjustments. I have too many games down right now and limited time. Was really, really happy to get some time yesterday to fix a few minor issues.
Duane
So....
Finally got to setting the basement back up.
1. Set Elvis up, had to adjust a switch as the left flipper was weak. Adjusted, played, adjusted, got it right, got a nice score and remembered why this game is so awesome.
2. Set up 4 Million BC. Played a few games. Had stored it for a few months. Needs one switch adjusted, but otherwise plays great.
3. Fixed a switch on T3. Played a few games, now plays perfect.
4. Right flipper was weak on Funhouse. I had been considering selling it. Replaced the stopper and played a few games. Nope, not selling it. What a great game. I love when you get a Jackpot and Rudy goes apeshit. What an incredible toy!
5. Shadow was having some strange issues with the upper playfield. Played a few games and pocked around. Seems to be playing fine now.
6. Moved Slugfest and Hotshots, plugged them in and played a few games.
The basement is finally coming back. Next, shaker motor in Spiderman -- only had that since November , fix upper flipper on No Fear, trouble shoot STNG and then finally get to WCS. Oh and there's a Road Show to fix and Fireball is spitting out two balls -- probably just switch adjustments. I have too many games down right now and limited time. Was really, really happy to get some time yesterday to fix a few minor issues.
Duane
Looking for web/graphic design, hosting, application Development, or CMS design/hosting?
MarketAccess Communications Inc.
Providing exceptional services for Small Business, Associations and Government
http://www.marketaccess.ca
Just Accessibility - Accessible Document Consulting and Remediation
https://www.justaccessibility.com/
Hosted in Canada Surveys
http://www.hostedincanadasurveys.ca/
MarketAccess Communications Inc.
Providing exceptional services for Small Business, Associations and Government
http://www.marketaccess.ca
Just Accessibility - Accessible Document Consulting and Remediation
https://www.justaccessibility.com/
Hosted in Canada Surveys
http://www.hostedincanadasurveys.ca/
Re: What did you do today?
Stripped & cleaned one of the dirtiest playfields I've ever seen. I have games twice as old that weren't this bad.
Pins - http://www.pinballowners.com/snazzy81
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Re: What did you do today?
Apart from more touch-ups and such on High Speed and Mata Hari, I worked on Hyann's 60-in-1:
- built a new control panel which now includes a trackball
- reoriented the monitor inside the cab
- installed the board inside the cab
- rewired a couple of things
I just have to install a volume control on it and a perform a couple of minor adjustments.
- built a new control panel which now includes a trackball
- reoriented the monitor inside the cab
- installed the board inside the cab
- rewired a couple of things
I just have to install a volume control on it and a perform a couple of minor adjustments.
- P1AG Montréal - pièces/parts
- MAACA Super Contributor
- Posts: 889
- Joined: Thu Sep 16, 2010 6:54 pm
- Contact:
Re: What did you do today?
Suppose to fix an Old Chicago in Brossard tonight after work, but the call got cancelled in the late afternoon so I called up a guy in St.Jean instead who has been waiting a while for an appointment. I was not geared or tooled up for an SS tonight but took the chance anyway and did the call.
Bally Skateball not booting after coming out of storage was the call. OK, let's go. Guy has it in his "man garage", no really, a seperate building in the form of a commercial garage (hydraulic lift in the ground) decorated in old pedal cars, Coca Cola signs etc., all sorts of models, this guy was definitely not looking to the future for any reassurance.
All voltages present at the test points on the supply, no flashes at all on the MPU led, just lit faintly and 3.89VDC at TP1 on the MPU. Solenoid driver board not regulating the 5vdc properly. No spare in the Honda since I didn't gear up for an SS call, another lesson learned, don't take on too much too fast, your luck will eventually run out and you'll waste time, one of the biggest crimes in my book.
Bally Skateball not booting after coming out of storage was the call. OK, let's go. Guy has it in his "man garage", no really, a seperate building in the form of a commercial garage (hydraulic lift in the ground) decorated in old pedal cars, Coca Cola signs etc., all sorts of models, this guy was definitely not looking to the future for any reassurance.
All voltages present at the test points on the supply, no flashes at all on the MPU led, just lit faintly and 3.89VDC at TP1 on the MPU. Solenoid driver board not regulating the 5vdc properly. No spare in the Honda since I didn't gear up for an SS call, another lesson learned, don't take on too much too fast, your luck will eventually run out and you'll waste time, one of the biggest crimes in my book.
Last edited by P1AG Montréal - pièces/parts on Fri Mar 04, 2011 9:19 am, edited 2 times in total.
Montréal : 1200 rue Bégin, St-Laurent, Qc H4R 1X1
robert.barake(at)cineplex.com
benoit.lecavalier(at)cineplex.com
514-856-2252 ou 888-322-2252
Toronto : 6420 Viscount Road, Mississauga, On L4V 1H3
doug.baird(at)cineplex.com
james.albernaz(at)cineplex.com
416-251-2122 or 888-977-4263
http://www.theplaydiumstore.com
http://www.winwithp1ag.com
robert.barake(at)cineplex.com
benoit.lecavalier(at)cineplex.com
514-856-2252 ou 888-322-2252
Toronto : 6420 Viscount Road, Mississauga, On L4V 1H3
doug.baird(at)cineplex.com
james.albernaz(at)cineplex.com
416-251-2122 or 888-977-4263
http://www.theplaydiumstore.com
http://www.winwithp1ag.com
Re: What did you do today?
Set most of pins back up!
Anyone who knows Terry knows that he's full of poo and likes to stir the pot. It's just part of his ironic personality and fits well with his asshole facade." -Cooke
A world without guys like Terry in it would probably be like the future world in Demolition Man. One filled with 47-year-old virgin men sitting around in their beige pajamas, drinking a banana-broccoli shake, singing "I'm an Oscar Meyer Wiener". -Sparky
A world without guys like Terry in it would probably be like the future world in Demolition Man. One filled with 47-year-old virgin men sitting around in their beige pajamas, drinking a banana-broccoli shake, singing "I'm an Oscar Meyer Wiener". -Sparky
Re: What did you do today?
Worked on Surf Champ plastic #2 rework in paint.
Pins - http://www.pinballowners.com/snazzy81
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: What did you do today?
Start stripping F2K for the playfeild swap.
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- Azatotht
- Admins
- Posts: 9188
- Joined: Wed Nov 18, 2009 9:32 pm
- Location: Anjou (Montreal)
- Has liked: 373 times
- Been liked: 117 times
- Contact:
Re: What did you do today?
We need details !Sparky wrote:Worked out a trade for 2 pins.
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)
Pinball machines I have owned
I, am Dracula... (and you're not!)
Pinball machines I have owned
Re: What did you do today?
Incredible Hulk and Sorcerer. Still need to work out the details, but looks like a go.Azatotht wrote:We need details !Sparky wrote:Worked out a trade for 2 pins.
- hyann
- MAACA Mega Contributor
- Posts: 2243
- Joined: Thu Sep 16, 2010 11:34 am
- Location: St-jean-sur-Richelieu QC (near MTL)
- Has liked: 1 time
- Been liked: 18 times
Re: What did you do today?
Continued working on the Minstrel Men. All moving parts are gummed and/or rusty so I need to deassemble most of them to make a good clean-up. Only the drop target to clean.
And start planning for 2 mames... this projets will finally come to life hopefully by the end of the year. I think I joined Maaca in 2007 because I wanted infos to build a Mame but got the pinball disease!
And start planning for 2 mames... this projets will finally come to life hopefully by the end of the year. I think I joined Maaca in 2007 because I wanted infos to build a Mame but got the pinball disease!
http://www.pinballowners.com/hyann
Working on: Taxi PF restoration
In french: Blog sur machines, romans et jeux: http://machines-romans-jeux.blogspot.com
MPL 2009-2010 Iron Man and Royal Flush: Best effort awards
MPL 2010-2011 Gary stern trophy !
Working on: Taxi PF restoration
In french: Blog sur machines, romans et jeux: http://machines-romans-jeux.blogspot.com
MPL 2009-2010 Iron Man and Royal Flush: Best effort awards
MPL 2010-2011 Gary stern trophy !
- Azatotht
- Admins
- Posts: 9188
- Joined: Wed Nov 18, 2009 9:32 pm
- Location: Anjou (Montreal)
- Has liked: 373 times
- Been liked: 117 times
- Contact:
Re: What did you do today?
Cool !Sparky wrote:Sorcerer...
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)
Pinball machines I have owned
I, am Dracula... (and you're not!)
Pinball machines I have owned
Re: What did you do today?
I can tell you what this crazy fat-ass mofo will do tonight!!!
1- finish up a 60-in-1
2- finishing work on a Squidcade
3- testing on Mike Clinton's mame
4- clean up the frickin mess in my shop
5- work on playfields again
... and do it all with a smile on my face.
1- finish up a 60-in-1
2- finishing work on a Squidcade
3- testing on Mike Clinton's mame
4- clean up the frickin mess in my shop
5- work on playfields again
... and do it all with a smile on my face.
- necro_nemesis
- MAACA OG
- Posts: 8675
- Joined: Wed Nov 18, 2009 10:32 pm
- Location: Within mechanism_8 or simply Newmarket
- Has liked: 14 times
- Been liked: 29 times
Re: What did you do today?
Fumes or genuinely happy?Sparky wrote:... and do it all with a smile on my face.
Pins: Scared Stiff - Getaway - Funhouse - Twilightzone - No Fear - Attack from Mars - Indiana Jones - Cirqus Voltaire (prototype) - Medieval Madness - Tales of Arabian Nights. Arcades: Robotron (cocktail) - Stargate - Midway Haunted House. Jukes: Seeburg 100c - Seeburg 222.
Rumors of my demise have been greatly exaggerated.
Rumors of my demise have been greatly exaggerated.
Re: What did you do today?
Finished a 60in1, started removing the mylar on the Strikes & Spares , continued working on 2nd Surf Champ plastic art.
Pins - http://www.pinballowners.com/snazzy81
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Vids - Centipede, Mame Cabinet, Megatouch Double Platinum, Sea Wolf, 1256in1 NBA Jam cabinet, Space Invaders, Asteroids Cocktail, GT2K5
Misc - Pachinko, Pashislo, Roberto Foosball, 1939 Bally Variety Sequence Game, Royal Hawaiian Bowler, The Grappler, CC Hockey Champ, CC TV Baseball, Super Hang-On
Re: What did you do today?
made some more shooter rod and Freddy glove casting, developed a new and improved Lightbulb shooter rod (now more glow-in-the-dark!) and spent some much needed time with the wife.
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: What did you do today?
Finish strip the upper playfield in F2K and realized that I have maybe 30 metal stand off to do...
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- Cobra99
- MAACA Mega Contributor
- Posts: 1327
- Joined: Thu Nov 19, 2009 2:01 pm
- Location: Calgary, Alberta
Re: What did you do today?
Installed the GLM Upper PF switch kit for my TZ. This makes a big difference on the viewing of the upper PF. Great little mod .
My Collection
Terminator 2.....Hyperball.....Iron Man.....Transformers Autobot LE #48 of 125
Theater of Magic.....RFM(NUCORE).....Twilight Zone.....TRON LE #74
Lord Of the Rings.....Terminator 3.....Family Guy.....The Simpsons Pinball Party
Stern-Spider Man.....MMRLE(On Order).....Predator #43.....SWE1(Playfield)
Gone and will be missed
DH
STTNG
Taxi
JD
JM
Pinball Owners collection http://www.pinballowners.com/cobra99
See my Games room section
For Sale/Trade
Hyperball
****Wanted****
MM
Flintstones
Terminator 2.....Hyperball.....Iron Man.....Transformers Autobot LE #48 of 125
Theater of Magic.....RFM(NUCORE).....Twilight Zone.....TRON LE #74
Lord Of the Rings.....Terminator 3.....Family Guy.....The Simpsons Pinball Party
Stern-Spider Man.....MMRLE(On Order).....Predator #43.....SWE1(Playfield)
Gone and will be missed
DH
STTNG
Taxi
JD
JM
Pinball Owners collection http://www.pinballowners.com/cobra99
See my Games room section
For Sale/Trade
Hyperball
****Wanted****
MM
Flintstones