Carpentry project jukebox stand

The place to discuss about all things related to jukeboxes!!
User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Carpentry project jukebox stand

Post by redketchup »

My little jukebox was coming with a stand when buy brand new in 1941… but most of the operator throw it away because they want to put it on the bar counter, as for result they are really rare and cost more then the jukebox itself when you find one.

There is a guy in the US who did a repro that look pretty good, but it sell for 3500$ us and I need to go get it to chicago…

This what it should look like
6702C58E-BDDD-401B-87E7-9B765F171FEB.jpeg
So After some motivation from Paidge, i decide i can do it myself! :shock:

I brainstorm this for more than 2 month, buy some new tool, wood, etc… I start the project yesterday…
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

The first part i want to do is the top of the stand….
6F2EE485-6EA9-4716-8F6D-010BADC9D53E.jpeg
F77BAA5F-3EA0-4025-96CC-B26456307310.jpeg
With the help of paidge, we found a molding that should work for the curve part…
BD82CB9C-8CD1-4D90-A35D-64C1763FBFC9.jpeg
I made some plan at the real size
054B9BD9-1A72-4200-9359-259430AB3059.jpeg
And i start cutting wood this morning… cutting jig for the 45degrees
6B6263D8-5B63-4DC3-9E06-E477D49C1FCB.jpeg
And made a jig for the gluing part
D43EBD2B-6AAB-4E48-9CBC-FBF20899E43C.jpeg
8E459A17-AAAA-4F30-9053-C4CAFB732155.jpeg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

I also make a jig to cut the corner with the router
Attachments
0C555C71-A998-4D13-BF22-27A8EE3039EC.jpeg
908F5099-E9DD-4162-9129-53A6E860A7E6.jpeg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
HPR Pinball
MAACA OG
Posts: 7742
Joined: Thu Sep 16, 2010 4:53 pm
Location: St-Rose, Laval
Has liked: 4 times
Been liked: 52 times

Re: Carpentry project jukebox stand

Post by HPR Pinball »

Je suis certain que tu va finir avant moi mais ça va me motiver ha ha!
The video game i want to play is always the one i don't have :FP:
Les arcades, j'suis tombé d'dans quand j'tait pti !! :-)

User avatar
Mrhide
MAACA OG
Posts: 11744
Joined: Fri Nov 20, 2009 6:59 pm
Location: Laval
Has liked: 166 times
Been liked: 70 times

Re: Carpentry project jukebox stand

Post by Mrhide »

osti de malade que c'est beau !
LF: GrooveCoaster, shmups or any PCB, let me know what you have!

User avatar
paidge
MAACA Millennial
Posts: 1272
Joined: Fri Sep 17, 2010 7:14 am
Location: Nicolet
Has liked: 1 time
Been liked: 17 times

Re: Carpentry project jukebox stand

Post by paidge »

Qui c’est ça Paidge

User avatar
Mindstorm88
MAACA Millennial
Posts: 1303
Joined: Sat Nov 21, 2009 9:41 am
Location: Varennes, Qc
Has liked: 6 times
Been liked: 14 times

Re: Carpentry project jukebox stand

Post by Mindstorm88 »

Super , utilisation de moulure ! bonne idée 8-) :D

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

I also made the part that goes over the molding and under…

Next, i will cut the corner to make the nice round shape…
Attachments
F30228F7-819C-43E5-89BD-07F4ABEE800B.jpeg
D2A1EC52-6F22-4FCB-A4A2-706ED7603ED4.jpeg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
Sly
MAACA Millennial
Posts: 1029
Joined: Sat Jan 29, 2011 9:40 am
Location: Montréal
Been liked: 11 times

Re: Carpentry project jukebox stand

Post by Sly »

m
a
g
n
i
f
i
q
u
e
!
Last Action Hero Data East: To be, or not to be. Not to be !!!
Black Hole Gottlieb: Re-entry attempt has FAILED !!!
Terminator 2 Williams: Lock sequence initiated !!!
TRON Stern: The grid, a digital frontier !!!
Baby Pacman Bally: Waka Waka Waka !!!


The best game is ALWAYS the one you dont have.

User avatar
Sparky
MAACA OG
Posts: 23412
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL
Has liked: 5 times
Been liked: 139 times

Re: Carpentry project jukebox stand

Post by Sparky »

Après ça, on va aux magasins et on réalise que ce qui est neuf aujourd'hui est de la merde qui ne dure pas 10 ans. LOL

Inspirant, Gino!!!
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

More progress, cut the corner and route it with the jig…
2BA3B019-6D4B-4B66-80FA-7C2687F01AEE.jpeg
992CA194-0628-402D-A808-AB2E854E496A.jpeg
14137DAD-0D71-4A36-A331-398EE87897B2.jpeg
Made my first mistake, never route against the wood fiber, should be able to repair it and since this part is paint, it should be ok
F0265B8C-4327-4BC5-9575-73B399997E5D.jpeg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
HPR Pinball
MAACA OG
Posts: 7742
Joined: Thu Sep 16, 2010 4:53 pm
Location: St-Rose, Laval
Has liked: 4 times
Been liked: 52 times

Re: Carpentry project jukebox stand

Post by HPR Pinball »

Fascinant !! C'est beau et bien ajuster.
The video game i want to play is always the one i don't have :FP:
Les arcades, j'suis tombé d'dans quand j'tait pti !! :-)

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

Mistake reparation done

I reglue the part that was broken and use Kwickwood to fill the missing wood.
96CD702D-E670-4822-ACD9-36ACB478E8EF.jpeg
This is an awesome product, dry in 30 minutes, and it can be sand and paint… when dry, hard as rock!
CA2ACB79-7336-4F06-864C-C4FE1C760EF1.jpeg
367EF1C0-ADA2-4D27-B271-0D86F0B5F150.jpeg
870765D4-D80E-41CD-A3FF-05F90BC35350.jpeg
3B685AB1-94BC-44EF-985B-7EC354BA7A17.jpeg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
Azatotht
Admins
Posts: 9063
Joined: Wed Nov 18, 2009 9:32 pm
Location: Anjou (Montreal)
Has liked: 99 times
Been liked: 27 times
Contact:

Re: Carpentry project jukebox stand

Post by Azatotht »

Belle job Gino !
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)

User avatar
World_of_Warships
MAACA Half-ling
Posts: 630
Joined: Thu Apr 09, 2020 7:07 pm
Location: National Capital Region
Has liked: 73 times
Been liked: 54 times

Re: Carpentry project jukebox stand

Post by World_of_Warships »

Ça va être super beau, hâte de voir comment les appliqués rouges/silver vont être fabriqué. Pas moyen de cacher un subwoofer dans la base? 8-)

User avatar
Chnillapoil
MAACA Chatterbox
Posts: 1832
Joined: Sat Jul 30, 2011 7:17 am
Location: Laval
Has liked: 9 times
Been liked: 12 times

Re: Carpentry project jukebox stand

Post by Chnillapoil »

Belle job Gino, je savais que tu étais capable ;)
HIGH SPEED 1986
PIN*BOT 1986
TAXI 1988
:rifle OLD CHICAGO 1976
MAME MARIO BROS 1983
EIGHT BALL DELUXE LE 1982
FATHOM 1980
MS PACMAN (cocktail project)
ROBOTRON
GTB GENESIS (project)

User avatar
Mrhide
MAACA OG
Posts: 11744
Joined: Fri Nov 20, 2009 6:59 pm
Location: Laval
Has liked: 166 times
Been liked: 70 times

Re: Carpentry project jukebox stand

Post by Mrhide »

on passe nos commandes à quel endroit?
LF: GrooveCoaster, shmups or any PCB, let me know what you have!

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

I route the roundover today and glue everything together, will have to sand a little more but the top is pretty close done!
3B859E22-9335-418B-BFC2-71627E048FFD.jpeg
7443B188-2C49-4EB9-BF6B-16889C6E483F.jpeg
I also made the second thikness for the base
C7F3A3A8-DD3A-4524-B680-626B987C7676.jpeg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
Marsupial
MAACA QuarterPounder
Posts: 371
Joined: Thu Sep 16, 2010 7:57 pm
Location: Vaudreuil-Dorion, west-island Montreal.
Contact:

Re: Carpentry project jukebox stand

Post by Marsupial »

Vraiment beau! Merci de partager ton progrès!
-Mars

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

Today was the kerf bending test day!

Kerf bending is way to make round corner with plywood. You have to cut strip in certain distance to acheive the radius you need. There is a calculator available online but its doesn’t work really good for me… it was a good start, but i acheive what i want with a lot of try and error.

https://www.blocklayer.com/kerf-spacingeng.aspx
83DBAE70-3699-4CD5-ABC5-8FAA2F6D4083.jpeg
60B3EE9E-584A-4C6E-A200-8211C3051856.jpeg
When i got the radius i want, i mark it in my table saw and was ready to cut the real Plywood
2DE7B21D-BE38-42A0-8E66-4DD68015A170.jpeg
DE12E74D-1F32-4BEF-81CD-217DABA24EAB.jpeg
Last step, i wet the plywood to help bending and use gorilla glue to glue it. Clamp everything and wait 3h to dry
738CDD5E-3737-4479-B2ED-D371D7E02FB8.jpeg
35DAA72D-09B1-455D-B223-BBA896A8A7BB.jpeg
83FD777D-2250-4BA2-94AD-B12999C74B5B.jpeg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
Steph
MAACA Wacko
Posts: 2931
Joined: Thu Sep 16, 2010 12:50 pm
Location: Ottawa, Ontario
Has liked: 1 time
Been liked: 17 times

Re: Carpentry project jukebox stand

Post by Steph »

I marvel at your craftsmanship.

Impressive in every respect.

Steph
2084 : Last Hope for Humanity

User avatar
Sly
MAACA Millennial
Posts: 1029
Joined: Sat Jan 29, 2011 9:40 am
Location: Montréal
Been liked: 11 times

Re: Carpentry project jukebox stand

Post by Sly »

redketchup wrote:
Thu Jun 24, 2021 4:28 pm
Today was the kerf bending test day!

Kerf bending is way to make round corner with plywood. You have to cut strip in certain distance to acheive the radius you need. There is a calculator available online but its doesn’t work really good for me… it was a good start, but i acheive what i want with a lot of try and error.

https://www.blocklayer.com/kerf-spacingeng.aspx

83DBAE70-3699-4CD5-ABC5-8FAA2F6D4083.jpeg60B3EE9E-584A-4C6E-A200-8211C3051856.jpeg

When i got the radius i want, i mark it in my table saw and was ready to cut the real Plywood
2DE7B21D-BE38-42A0-8E66-4DD68015A170.jpeg
DE12E74D-1F32-4BEF-81CD-217DABA24EAB.jpeg

Last step, i wet the plywood to help bending and use gorilla glue to glue it. Clamp everything and wait 3h to dry

738CDD5E-3737-4479-B2ED-D371D7E02FB8.jpeg35DAA72D-09B1-455D-B223-BBA896A8A7BB.jpeg83FD777D-2250-4BA2-94AD-B12999C74B5B.jpeg
C'est juste fou!
Last Action Hero Data East: To be, or not to be. Not to be !!!
Black Hole Gottlieb: Re-entry attempt has FAILED !!!
Terminator 2 Williams: Lock sequence initiated !!!
TRON Stern: The grid, a digital frontier !!!
Baby Pacman Bally: Waka Waka Waka !!!


The best game is ALWAYS the one you dont have.

User avatar
Mrhide
MAACA OG
Posts: 11744
Joined: Fri Nov 20, 2009 6:59 pm
Location: Laval
Has liked: 166 times
Been liked: 70 times

Re: Carpentry project jukebox stand

Post by Mrhide »

osti de malade!! NICE
LF: GrooveCoaster, shmups or any PCB, let me know what you have!

User avatar
redketchup
MAACA Wacko
Posts: 4851
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 34 times
Been liked: 75 times
Contact:

Re: Carpentry project jukebox stand

Post by redketchup »

Merci les boys! Its a fun project with a lot of new skill involved
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
HPR Pinball
MAACA OG
Posts: 7742
Joined: Thu Sep 16, 2010 4:53 pm
Location: St-Rose, Laval
Has liked: 4 times
Been liked: 52 times

Re: Carpentry project jukebox stand

Post by HPR Pinball »

Ce travail a la main est impressionnant et certainement gratifiant. Ces beaux projets vont nous survivre pour plusieurs générations!
The video game i want to play is always the one i don't have :FP:
Les arcades, j'suis tombé d'dans quand j'tait pti !! :-)

Post Reply

Return to “Jukeboxes only”