Carpentry project jukebox stand
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Carpentry project jukebox stand
My little jukebox was coming with a stand when buy brand new in 1941… but most of the operator throw it away because they want to put it on the bar counter, as for result they are really rare and cost more then the jukebox itself when you find one.
There is a guy in the US who did a repro that look pretty good, but it sell for 3500$ us and I need to go get it to chicago…
This what it should look like
So After some motivation from Paidge, i decide i can do it myself!
I brainstorm this for more than 2 month, buy some new tool, wood, etc… I start the project yesterday…
There is a guy in the US who did a repro that look pretty good, but it sell for 3500$ us and I need to go get it to chicago…
This what it should look like
So After some motivation from Paidge, i decide i can do it myself!
I brainstorm this for more than 2 month, buy some new tool, wood, etc… I start the project yesterday…
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
The first part i want to do is the top of the stand….
I made some plan at the real size
And i start cutting wood this morning… cutting jig for the 45degrees
And made a jig for the gluing part
With the help of paidge, we found a molding that should work for the curve part…I made some plan at the real size
And i start cutting wood this morning… cutting jig for the 45degrees
And made a jig for the gluing part
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
I also make a jig to cut the corner with the router
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- HPR Pinball
- MAACA OG
- Posts: 7936
- Joined: Thu Sep 16, 2010 4:53 pm
- Location: St-Rose, Laval
- Has liked: 15 times
- Been liked: 114 times
Re: Carpentry project jukebox stand
Je suis certain que tu va finir avant moi mais ça va me motiver ha ha!
The video game i want to play is always the one i don't have
Les arcades, j'suis tombé d'dans quand j'tait pti !!
Les arcades, j'suis tombé d'dans quand j'tait pti !!
- Mrhide
- MAACA OG
- Posts: 12182
- Joined: Fri Nov 20, 2009 6:59 pm
- Location: Laval
- Has liked: 425 times
- Been liked: 258 times
Re: Carpentry project jukebox stand
osti de malade que c'est beau !
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!
- Mindstorm88
- MAACA Mega Contributor
- Posts: 1350
- Joined: Sat Nov 21, 2009 9:41 am
- Location: Sorel-Tracy, Qc
- Has liked: 44 times
- Been liked: 52 times
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
I also made the part that goes over the molding and under…
Next, i will cut the corner to make the nice round shape…
Next, i will cut the corner to make the nice round shape…
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- Sly
- MAACA Mega Contributor
- Posts: 1039
- Joined: Sat Jan 29, 2011 9:40 am
- Location: Montréal
- Been liked: 13 times
Re: Carpentry project jukebox stand
m
a
g
n
i
f
i
q
u
e
!
a
g
n
i
f
i
q
u
e
!
Elektra Bally: Prepare for the Gamma Dimension! !!!
Last Action Hero Data East: To be, or not to be. Not to be !!!
Rollergames Williams: Go for the wall !!!
Big guns Williams: She's mine now! Ah ha ha ha !!!
TRON Stern: The grid, a digital frontier !!!
Baby Pacman Bally: Waka Waka Waka !!!
Stargate Gottlieb: Shoot the pyramide !!!
The best game is ALWAYS the one you dont have.
Last Action Hero Data East: To be, or not to be. Not to be !!!
Rollergames Williams: Go for the wall !!!
Big guns Williams: She's mine now! Ah ha ha ha !!!
TRON Stern: The grid, a digital frontier !!!
Baby Pacman Bally: Waka Waka Waka !!!
Stargate Gottlieb: Shoot the pyramide !!!
The best game is ALWAYS the one you dont have.
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
More progress, cut the corner and route it with the jig…
Made my first mistake, never route against the wood fiber, should be able to repair it and since this part is paint, it should be ok
Made my first mistake, never route against the wood fiber, should be able to repair it and since this part is paint, it should be ok
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- HPR Pinball
- MAACA OG
- Posts: 7936
- Joined: Thu Sep 16, 2010 4:53 pm
- Location: St-Rose, Laval
- Has liked: 15 times
- Been liked: 114 times
Re: Carpentry project jukebox stand
Fascinant !! C'est beau et bien ajuster.
The video game i want to play is always the one i don't have
Les arcades, j'suis tombé d'dans quand j'tait pti !!
Les arcades, j'suis tombé d'dans quand j'tait pti !!
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
Mistake reparation done
I reglue the part that was broken and use Kwickwood to fill the missing wood. This is an awesome product, dry in 30 minutes, and it can be sand and paint… when dry, hard as rock!
I reglue the part that was broken and use Kwickwood to fill the missing wood. This is an awesome product, dry in 30 minutes, and it can be sand and paint… when dry, hard as rock!
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- Azatotht
- Admins
- Posts: 9188
- Joined: Wed Nov 18, 2009 9:32 pm
- Location: Anjou (Montreal)
- Has liked: 373 times
- Been liked: 117 times
- Contact:
Re: Carpentry project jukebox stand
Belle job Gino !
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)
Pinball machines I have owned
I, am Dracula... (and you're not!)
Pinball machines I have owned
-
- MAACA Super Contributor
- Posts: 721
- Joined: Thu Apr 09, 2020 7:07 pm
- Has liked: 84 times
- Been liked: 74 times
Re: Carpentry project jukebox stand
Ça va être super beau, hâte de voir comment les appliqués rouges/silver vont être fabriqué. Pas moyen de cacher un subwoofer dans la base?
- Mrhide
- MAACA OG
- Posts: 12182
- Joined: Fri Nov 20, 2009 6:59 pm
- Location: Laval
- Has liked: 425 times
- Been liked: 258 times
Re: Carpentry project jukebox stand
on passe nos commandes à quel endroit?
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
I route the roundover today and glue everything together, will have to sand a little more but the top is pretty close done!
I also made the second thikness for the base
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
Today was the kerf bending test day!
Kerf bending is way to make round corner with plywood. You have to cut strip in certain distance to acheive the radius you need. There is a calculator available online but its doesn’t work really good for me… it was a good start, but i acheive what i want with a lot of try and error.
https://www.blocklayer.com/kerf-spacingeng.aspx
When i got the radius i want, i mark it in my table saw and was ready to cut the real Plywood Last step, i wet the plywood to help bending and use gorilla glue to glue it. Clamp everything and wait 3h to dry
Kerf bending is way to make round corner with plywood. You have to cut strip in certain distance to acheive the radius you need. There is a calculator available online but its doesn’t work really good for me… it was a good start, but i acheive what i want with a lot of try and error.
https://www.blocklayer.com/kerf-spacingeng.aspx
When i got the radius i want, i mark it in my table saw and was ready to cut the real Plywood Last step, i wet the plywood to help bending and use gorilla glue to glue it. Clamp everything and wait 3h to dry
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- Sly
- MAACA Mega Contributor
- Posts: 1039
- Joined: Sat Jan 29, 2011 9:40 am
- Location: Montréal
- Been liked: 13 times
Re: Carpentry project jukebox stand
C'est juste fou!redketchup wrote: ↑Thu Jun 24, 2021 4:28 pm Today was the kerf bending test day!
Kerf bending is way to make round corner with plywood. You have to cut strip in certain distance to acheive the radius you need. There is a calculator available online but its doesn’t work really good for me… it was a good start, but i acheive what i want with a lot of try and error.
https://www.blocklayer.com/kerf-spacingeng.aspx
83DBAE70-3699-4CD5-ABC5-8FAA2F6D4083.jpeg60B3EE9E-584A-4C6E-A200-8211C3051856.jpeg
When i got the radius i want, i mark it in my table saw and was ready to cut the real Plywood
2DE7B21D-BE38-42A0-8E66-4DD68015A170.jpeg
DE12E74D-1F32-4BEF-81CD-217DABA24EAB.jpeg
Last step, i wet the plywood to help bending and use gorilla glue to glue it. Clamp everything and wait 3h to dry
738CDD5E-3737-4479-B2ED-D371D7E02FB8.jpeg35DAA72D-09B1-455D-B223-BBA896A8A7BB.jpeg83FD777D-2250-4BA2-94AD-B12999C74B5B.jpeg
Elektra Bally: Prepare for the Gamma Dimension! !!!
Last Action Hero Data East: To be, or not to be. Not to be !!!
Rollergames Williams: Go for the wall !!!
Big guns Williams: She's mine now! Ah ha ha ha !!!
TRON Stern: The grid, a digital frontier !!!
Baby Pacman Bally: Waka Waka Waka !!!
Stargate Gottlieb: Shoot the pyramide !!!
The best game is ALWAYS the one you dont have.
Last Action Hero Data East: To be, or not to be. Not to be !!!
Rollergames Williams: Go for the wall !!!
Big guns Williams: She's mine now! Ah ha ha ha !!!
TRON Stern: The grid, a digital frontier !!!
Baby Pacman Bally: Waka Waka Waka !!!
Stargate Gottlieb: Shoot the pyramide !!!
The best game is ALWAYS the one you dont have.
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
Merci les boys! Its a fun project with a lot of new skill involved
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup
- HPR Pinball
- MAACA OG
- Posts: 7936
- Joined: Thu Sep 16, 2010 4:53 pm
- Location: St-Rose, Laval
- Has liked: 15 times
- Been liked: 114 times
Re: Carpentry project jukebox stand
Ce travail a la main est impressionnant et certainement gratifiant. Ces beaux projets vont nous survivre pour plusieurs générations!
The video game i want to play is always the one i don't have
Les arcades, j'suis tombé d'dans quand j'tait pti !!
Les arcades, j'suis tombé d'dans quand j'tait pti !!
- redketchup
- MAACA Mega Contributor
- Posts: 4882
- Joined: Thu Nov 19, 2009 12:15 am
- Location: Laval,Qc
- Has liked: 44 times
- Been liked: 143 times
- Contact:
Re: Carpentry project jukebox stand
Baltic birch 5/8
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup
To see it: http://www.pinballowners.com/redketchup