Spring break multiball problem

Talk about solid-state and DMD pinball machines
User avatar
Cybercid
MAACA Collaborator
Posts: 173
Joined: Tue Feb 21, 2012 12:24 pm
Location: Rosemere

Spring break multiball problem

Postby Cybercid » Sun May 14, 2017 10:16 am

I love system 80B!!! lol good for fire wood!!!! My Spring break that I love, has been making me go crazy, it was dead mpu problem... then connectors.... Now it back to life but I have a small problem, no multi ball. On the out-hole switch 37 is close! not a switch problem check! I have tried to bypass still closed! it seems I am searching in the dark! Is there a relay or a chip that could be dead? What could I try?
Thanks
Game room:
Bally :
Playboy, Evel Knievel, Atlantis,
Williams:
Pinbot, Barracora, Alien Poker, Transporter the rescue, Space Station
Data East:
Torpedo Alley, Tales from the crypt
Gottlieb:
Black Hole, World Challenge Soccer.

Working on: Dr Who, Space Invaders, Big Hurt
Projet:Taxi, Moon Flight, Seven Up, Tri Zone
LF: Seawitch, Tag Team, Black Rose, Banzai Run, Gladiator.

User avatar
DrSmooth
MAACA Collaborator
Posts: 66
Joined: Sat Jan 04, 2014 7:12 pm
Location: Ottawa

Re: Spring break multiball problem

Postby DrSmooth » Sun May 14, 2017 8:17 pm

Doubt I can be much help... But there is a dipswitch that enables Multiball on the 1st, 2nd and 3rd ball. If this is in the opposite selection then it will only give you Multiball on the last ball. Also, if everything else works, what happens when you score a Multiball?
Dr.Who, World Cup Soccer, Rocky and Bullwinkle, Space Shuttle, Hardbody, D&D, Demolition Man, Lizard, Revenge From Mars, Gorgar, Special Force
Gone: Judge Dredd, Spring Break, Elektra, Big Guns

User avatar
Cybercid
MAACA Collaborator
Posts: 173
Joined: Tue Feb 21, 2012 12:24 pm
Location: Rosemere

Re: Spring break multiball problem

Postby Cybercid » Mon May 15, 2017 7:09 am

Thanks for the reply,
The Dip switch are ok, i start a game the multiball mod start but does not give the ball the last switch on the out hole should be ''open'' so the coil can distribute the balls. But for some reason the switch stays ''close''.
Still searching
Game room:
Bally :
Playboy, Evel Knievel, Atlantis,
Williams:
Pinbot, Barracora, Alien Poker, Transporter the rescue, Space Station
Data East:
Torpedo Alley, Tales from the crypt
Gottlieb:
Black Hole, World Challenge Soccer.

Working on: Dr Who, Space Invaders, Big Hurt
Projet:Taxi, Moon Flight, Seven Up, Tri Zone
LF: Seawitch, Tag Team, Black Rose, Banzai Run, Gladiator.

User avatar
DrDude
MAACA Mage
Posts: 455
Joined: Wed Mar 09, 2016 7:29 pm
Location: Manotick/Ottawa
Contact:

Re: Spring break multiball problem

Postby DrDude » Mon May 15, 2017 7:15 am

Cybercid wrote:Thanks for the reply,
The Dip switch are ok, i start a game the multiball mod start but does not give the ball the last switch on the out hole should be ''open'' so the coil can distribute the balls. But for some reason the switch stays ''close''.
Still searching

Don't know System 80 (yet! Black Hole is in the queue, so will doubtless be learning), but most switch-scan systems have diodes across the switches, and if you have that it could be shorted and cause the issue you state.
Grant Goodes
Stern: Meteor, Nineball, Seawitch, Lightning, Cheetah
Bally: Fathom x 2, Centaur
Gottlieb: Black Hole
Wanted: Catacomb, Solar Fire, Balls-a-Poppin Seawitch backglass
Lust-worthy: Funhouse, Skateball, Capersville



Return to “Pinball machines (SS/DMD)”

Who is online

Users browsing this forum: No registered users and 4 guests