Price: $6500 ! ! !
Located in Ottawa, about 5 stairs out of the basement. Mask required to view.
This is a second BSD I bought for reference while I restored my own BSD. Then I figured I might as well fix this one up too. Wow, what a lot of work!
Lots of new parts for this machine:
- BSD RadCals
Williams/Bally WPC Stainless Steel Side Rails
Williams/Bally Standard Size Stainless Steel Lockdown Bar With Epoxied Under-Carriage
Williams/Bally Lockdown Bar Lever Guide Assembly - WPC/WPC-95
Williams/Bally New Style Leg Brackets
Williams/Bally Chrome Legs
8 Extended Chrome Leg Bolts
Williams/Bally coin door
Williams/Bally Black Backbox Hinges
Hex Pivot Bushings
Pivot Bushing carriage bolts
WMS Backbox latch
Williams/Bally Backbox Toggle Latch Bracket
Williams/Bally Playfield Glass Rear Plastic Channel
Playfield Glass side rail plastics
Speaker Panel ’H’ Channel
new flipper mechs
all new plastic posts
new pop bumper wafer, body, caps, rings
all fasteners polished or replaced
new tempered glass (no logo)
probably some stuff I forgot
Pinball Customs coffin mod
custom painted castle and village
new Flipper Fidelity speaker set
The machine itself was completely torn down and rebuilt. Every fastener and piece of hardware cleaned/polished. Many switches and lamps replaced. All microswitches placed on connectors. Wire harnesses washed. All PCBs washed. Brand new Pinball Basement MPU board. All fuses verified/replaced.
Playfield is Sun Process, no planking. Rear sanded clean. Lightly touched up, clear coated with SprayMax2K and polished. Not a perfect playfield but still very nice.
Ramps are serviceable, some light ball trails but I didn't have the nerve to flame polish. Plastics are fine.
It is all LED lights and incandescent flashers, I put back what it came with. (My BSD has all incandescent, that is the way I like it.)