Hey everyone,
I have been out of the loop for way too long. I need something to start building my way up again because I'm starting to lose interest into keeping this website up.
Have no pinball machine here at all and it's been like that for a while. Didn't have the budget and not complaining but it doesn't make much sense to still keep this forum up by myself when I'm totally out of this hobby.
So is it still possible to find a solid state projet for under 700$ these days? Have something ? PM me !
As for all the good luck wishes, feel free to post them, they will be needed
Feel free to discuss, I don't take this much seriously anymore, it is all for good fun.
Solid State project under 700$ ?
- Azatotht
- Admins
- Posts: 9188
- Joined: Wed Nov 18, 2009 9:32 pm
- Location: Anjou (Montreal)
- Has liked: 373 times
- Been liked: 117 times
- Contact:
Solid State project under 700$ ?
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)
Pinball machines I have owned
I, am Dracula... (and you're not!)
Pinball machines I have owned
- HPR Pinball
- MAACA OG
- Posts: 7936
- Joined: Thu Sep 16, 2010 4:53 pm
- Location: St-Rose, Laval
- Has liked: 15 times
- Been liked: 114 times
Re: Solid State project under 700$ ?
Des pinballs en etat project il n'y en a pratiquement plus a vendre mais il y en a sûrement beaucoup chez les gens en storage. Je ne voit pratiquement pas une game project en bas de 1200$ a moins qu'il y ai 2000$ a investir dessus.
The video game i want to play is always the one i don't have
Les arcades, j'suis tombé d'dans quand j'tait pti !!
Les arcades, j'suis tombé d'dans quand j'tait pti !!
- HPR Pinball
- MAACA OG
- Posts: 7936
- Joined: Thu Sep 16, 2010 4:53 pm
- Location: St-Rose, Laval
- Has liked: 15 times
- Been liked: 114 times
Re: Solid State project under 700$ ?
Ps:le dernier "project" que j'ai acheté ca fait au moins 10 ans et c'était une quicksilver dont le gars voulait 1000$ mais tellement magané que j'ai réussi a le convaincre de me vendre pour 600$
The video game i want to play is always the one i don't have
Les arcades, j'suis tombé d'dans quand j'tait pti !!
Les arcades, j'suis tombé d'dans quand j'tait pti !!
- cap
- MAACA Mega Contributor
- Posts: 1215
- Joined: Wed Apr 05, 2017 8:19 pm
- Location: Laval
- Been liked: 30 times
Re: Solid State project under 700$ ?
Meme sans pinball, tu fais encore partie de la gang!
A $700, tu pourrais avoir une arcade 1up. Je sais, pas pantoute la meme affaire.
A $700, tu pourrais avoir une arcade 1up. Je sais, pas pantoute la meme affaire.
Judge Dredd, Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat
- Mrhide
- MAACA OG
- Posts: 12182
- Joined: Fri Nov 20, 2009 6:59 pm
- Location: Laval
- Has liked: 425 times
- Been liked: 258 times
Re: Solid State project under 700$ ?
Final lap 2 !! 500$! Come and get it!
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!
- Azatotht
- Admins
- Posts: 9188
- Joined: Wed Nov 18, 2009 9:32 pm
- Location: Anjou (Montreal)
- Has liked: 373 times
- Been liked: 117 times
- Contact:
Re: Solid State project under 700$ ?
Thank you but I converted my basement into an office So one pinball machine it has to be...
I may have found something but you can still PM me if you have anything to offer.
Thanks everyone for your opinions, trying to figure today's market is harder than it was.
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)
Pinball machines I have owned
I, am Dracula... (and you're not!)
Pinball machines I have owned
- Azatotht
- Admins
- Posts: 9188
- Joined: Wed Nov 18, 2009 9:32 pm
- Location: Anjou (Montreal)
- Has liked: 373 times
- Been liked: 117 times
- Contact:
Re: Solid State project under 700$ ?
Ouin, NON
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)
Pinball machines I have owned
I, am Dracula... (and you're not!)
Pinball machines I have owned
- Mrhide
- MAACA OG
- Posts: 12182
- Joined: Fri Nov 20, 2009 6:59 pm
- Location: Laval
- Has liked: 425 times
- Been liked: 258 times
Re: Solid State project under 700$ ?
C’est le printemps! Met ca dans l’garage!Azatotht wrote: ↑Sun Apr 10, 2022 7:35 pmThank you but I converted my basement into an office So one pinball machine it has to be...
I may have found something but you can still PM me if you have anything to offer.
Thanks everyone for your opinions, trying to figure today's market is harder than it was.
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!