Thunderbirds Pinball Complete

Talk about anything that you would like.
User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Thunderbirds Pinball Complete

Post by cap »

Homepin published a video on their facebook page claiming Thunderbirds is ready and going in production now.
https://www.facebook.com/pg/homepin.factory
The machine in the video is the last prototype, in particular the ramp will be better.
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

User avatar
Azatotht
Admins
Posts: 8968
Joined: Wed Nov 18, 2009 9:32 pm
Location: Anjou (Montreal)
Contact:

Re: Thunderbirds Pinball Complete

Post by Azatotht »

Can't wait to have 10 minutes to watch this, good news :-)
I am the monster that breathing men would kill.
I, am Dracula... (and you're not!)

User avatar
Dave W.
MAACA Half-ling
Posts: 538
Joined: Sun Dec 12, 2010 11:20 pm
Location: Montreal (Ile Perrot)

Re: Thunderbirds Pinball Complete

Post by Dave W. »

Looks fun! Really hope that we see a few in the MTL/OTT area.

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

One thing I noticed are the two rubber posts protecting the entrance to the ramp.
This breaks the Pat Lawlor law of "reward them even if they miss", or another way he puts it: "Oops, but hopefully who ever watches will think I really meant to do that".
Compare that to the mini-targets guarding the ramps in Star Trek Vengeance.
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

Sparky
MAACA OG
Posts: 22951
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL

Re: Thunderbirds Pinball Complete

Post by Sparky »

Looks like a nice tight assembly. Interesting!! I hope it isn't 8000$. LOL
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349

User avatar
HPR Pinball
MAACA OG
Posts: 7361
Joined: Thu Sep 16, 2010 4:53 pm
Location: St-Rose, Laval

Re: Thunderbirds Pinball Complete

Post by HPR Pinball »

De que c'est que ca ..... :FP:
Inventory
Pins: http://www.pinballowners.com/hal-9ooo
Vids: http://www.arcade-museum.com/members/me ... _id=454505
Les arcades, j'suis tombé d'dans quand j'tait pti !! :-)

User avatar
Murphelman
MAACA QuarterPounder
Posts: 436
Joined: Wed May 03, 2017 10:03 am
Location: Ottawa

Re: Thunderbirds Pinball Complete

Post by Murphelman »

Orange DMD though? It makes it look a little dated. Good on them for getting itbdone though. Hope it does well. The more games the better.
Own
Stern: Black Knight: SoR, Iron Maiden, Deadpool, Walking Dead, Jurassic Park, Game of Thrones
Bally/Williams: Shadow (out on trade), Twilight Zone, Demolition Man, Fish Tales, Jack*Bot
Data East: Nothing
Gottlieb: Nothing
Bally: Future Spa, F14 Tomcat,
Williams: Laser Ball

Wishlist
Baywatch, Transformers, X-Men, Stern Star Trek, Paragon, Metallica, GnR, GoT
:mrgreen:

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

Sparky wrote:Looks like a nice tight assembly. Interesting!! I hope it isn't 8000$. LOL
The price Mike mentioned is $6499AU which he says is basically the same as $6499CAD
https://youtu.be/5Z5iY3lVpOw?t=3566
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

User avatar
cait001
MAACA Wacko
Posts: 4319
Joined: Tue Oct 09, 2012 3:42 pm
Location: Centretown, Ottawa, ON

Re: Thunderbirds Pinball Complete

Post by cait001 »

I really hope Homepin does well and is in a spot to really prove themselves over the next couple of years. Manufacturing in china and building all the parts in house is a bold move and I hope it's a success and pays off with many new games. And maybe... even a Chinese pinball boom eventually? Get thee a Jackie Chan themed machine and print that money.
$6500 Canadian is a decent price point for a newcomer, considering the other parts of the boutique market. Hopefully the shipping on top doesn't kill it.

But as for this game, it looks a bit of a turd. I have no idea why someone would bring back the waving targets that we all thought were leftover to the EM era.
The center ramp shot looks like Cyclone / Comet / Hurricane and I am not a fan of the shot on those games.
Great theme integration, sound, and art, and hopefully that will be enough to pull in enough sales.
WANTED: 21 (1946 Duval), NSM Freispiel Sieg Super-Match, 1984 Taito Zeke's Peak, 1972 Bally Continental Bingo slot machine, European upright machines, pre-1950s Japanese machines
backglasses wanted: Star-Jet, Fire Queen, Fairy, Out Of Sight
marquees wanted: Strider, Varkon, Dark Planet, R-Type (w/ship), Quantum
blog -- collection -- Pinball Women Ottawa -- Ottawa Pinball Map -- ratings

User avatar
semicolin
MAACA Half-ling
Posts: 854
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Contact:

Re: Thunderbirds Pinball Complete

Post by semicolin »

I know they're being assembled in China and things are done differently there, but that shot of the worker airbrushing a component with what is likely an isocyanate paint while wearing only a fiber mask kinda punched me right in the gut.

Pinball is already a luxury item. Getting it done in China so that he can charge less and not have to follow health and safety standards in the markets the game is being sold in just feels a little... I dunno, it feels rotten, even if I'm saving a couple of grand off the cost of a machine. Why not charge us pinheads just a little more and buy that worker a positive airflow mask?

I love pinball but it's a *game*- these workers are just doing a job, and if this worker keeps doing it the way the company has him set up, it's going to kill him.

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

semicolin wrote:I know they're being assembled in China and things are done differently there, but that shot of the worker airbrushing a component with what is likely an isocyanate paint while wearing only a fiber mask kinda punched me right in the gut.
Mike mentioned the China government is dead serious about the environment now. They forced him to improve the first water fall paint recovery contraption he built. I agree it would suck big times if he went through all the trouble to satisfy the China government without making his workers' health a priority.
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

Am I the only one that noticed he has a pinball factory but he has no assembly line?
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

Sparky
MAACA OG
Posts: 22951
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL

Re: Thunderbirds Pinball Complete

Post by Sparky »

cap wrote:
semicolin wrote:I know they're being assembled in China and things are done differently there, but that shot of the worker airbrushing a component with what is likely an isocyanate paint while wearing only a fiber mask kinda punched me right in the gut.
Mike mentioned the China government is dead serious about the environment now. They forced him to improve the first water fall paint recovery contraption he built. I agree it would suck big times if he went through all the trouble to satisfy the China government without making his workers' health a priority.
In the very near future, we will look like a primitive third-world country compared to China...
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

cait001 wrote:I have no idea why someone would bring back the waving targets that we all thought were leftover to the EM era.
ipdb says a swinging target was used as recently as 1991 in DE Star Trek.
I don't remember encountering this device. What's wrong with a swinging target?
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

Sparky wrote:In the very near future, we will look like a primitive third-world country compared to China...
That's an understatement if they get the thorium molten salt reactors to work.
We'll have to buy our reactors from them when we find out solar does not scale fast enough to save the planet.
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

User avatar
Homepin
MAACA Silent Type
Posts: 6
Joined: Fri Jan 19, 2018 7:09 am
Contact:

Re: Thunderbirds Pinball Complete

Post by Homepin »

Hello Guys,

Thanks for the kind words of support. It has been a very challenging four years to make it to this point. I started this project from an empty factory space and now I'm pleased to be able to say we are starting to build our first pinball machines. I would like to add a few details about some comments made in this thread.

The staff member "painting" the DMD panel was in fact posing for the camera - he is spraying water only. Our workers ALWAYS don the correct protective gear for every part of the job they are doing. But, on the subject of paint, we ONLY use water based "green" paint for all painting of our products.

We have made licenced video game tables under the well known Australian brand, "Hankin" for the last three years and we most certainly do have a production line, it just wasn't shown in that promo video (see a pic below with game tables on the line). We will alternate between tables and pinballs as the demand dictates. We also have other machines in the pipeline and all of this compliments our extensive range of replacement pinball PCBs that we have made for nearly ten years now.

I'm pleased to announce that Nitro Pinball in Vancouver is the sole Homepin authorised agent for Canada and they will be stocking the full range of Homepin products from Thunderbirds pinball (RRP US$4995) to Hankin game tables and also the full range of our replacement pinball PCBs. Contact Tommy if you are interested in any of our products as the first shipment is selling fast and it hasn't left yet!

We are readying for our first small run of TAG and we have placed orders with outside vendors for the things that we don't make such as the custom made plywood and the clear 2mm ramps but we are being thwarted a little by Chinese New Year that is looming at the moment.

A note on workplace, heath and safety, the Chinese Government is cracking down very heavily in this area and also environmental protection areas. We are inspected at least once a week in the factory by some other Govt department from fire to insurance and on the list goes. Long gone are the days of workers being paid $10 a week and living in squalor. Two of my staff have recently bought new cars (and I drive a used Great Wall pickup LOL) and a third is taking driving lessons at the moment. China in 2018 is nothing like the China from even 10 years ago. Most cars on the street are new 7 series BMWs, Benz's and Audi's. It isn't a joke, I'm very serious.

Anyway, thanks again for your support and I look forward to visiting again later this year for "Flipout".


Image
facebook.com/Homepin.Factory

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

Welcome to maaca. Most of our members are from Eastern Canada.
Nitro is very far from us which means we cannot visit their show room.
Maybe pincon or the Ottawa Pinball & Gameroom Show can get big enough for Nitro to bring a booth some day.

The video says you ship worldwide. Does that mean there will be a US distributor with stock soon?
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

User avatar
cait001
MAACA Wacko
Posts: 4319
Joined: Tue Oct 09, 2012 3:42 pm
Location: Centretown, Ottawa, ON

Re: Thunderbirds Pinball Complete

Post by cait001 »

Homepin wrote:Thunderbirds pinball (RRP US$4995)
Holy shit, $5k USD MSRP??? That's the dream right there, isn't it? Stern Pro pins are $6200 USD MSRP. https://pinside.com/pinball/forum/topic ... se-history
If you can produce fun and good looking games and serve them up for $1200 USD less than a Stern pro, that could potentially be a major game-changer.
Best of luck!
WANTED: 21 (1946 Duval), NSM Freispiel Sieg Super-Match, 1984 Taito Zeke's Peak, 1972 Bally Continental Bingo slot machine, European upright machines, pre-1950s Japanese machines
backglasses wanted: Star-Jet, Fire Queen, Fairy, Out Of Sight
marquees wanted: Strider, Varkon, Dark Planet, R-Type (w/ship), Quantum
blog -- collection -- Pinball Women Ottawa -- Ottawa Pinball Map -- ratings

Guard
MAACA QuarterPounder
Posts: 390
Joined: Sun Jun 04, 2017 1:23 am
Location: Guelph

Re: Thunderbirds Pinball Complete

Post by Guard »

I'll spend more for one made in North America.

But then I consider the Chinese Govt our enemy......
PINS- Hit The Deck/ Buccaneer/Sure Shot/Fire Queen/ Volley/ Tee'd Off/ Rollergames/ Star Trip/ Flip Flop/ Combat/ Flash Gordon/ Capt.Card/Bluenote/ Pat Hand /Strange Science/Card Whiz/ Genesis/Jolly Roger / Bally Beat The Clock/ Spanish Eyes/ Outer Space/Bronco/ Stern POTC
Projects- Jacks Open /Stratoflite/ Tri Zone/ Hang Glider
RIP- Sinbad/ Supersonic

User avatar
cait001
MAACA Wacko
Posts: 4319
Joined: Tue Oct 09, 2012 3:42 pm
Location: Centretown, Ottawa, ON

Re: Thunderbirds Pinball Complete

Post by cait001 »

Guard wrote:But then I consider the Chinese Govt our enemy......
I've got some bad news for you about the American government. :lol:
WANTED: 21 (1946 Duval), NSM Freispiel Sieg Super-Match, 1984 Taito Zeke's Peak, 1972 Bally Continental Bingo slot machine, European upright machines, pre-1950s Japanese machines
backglasses wanted: Star-Jet, Fire Queen, Fairy, Out Of Sight
marquees wanted: Strider, Varkon, Dark Planet, R-Type (w/ship), Quantum
blog -- collection -- Pinball Women Ottawa -- Ottawa Pinball Map -- ratings

uberhare
MAACA Half-ling
Posts: 611
Joined: Mon Mar 19, 2012 9:06 pm
Location: Stratford, Ontario

Re: Thunderbirds Pinball Complete

Post by uberhare »

Nice to see another brand out there producing machines, even if it is in China. Too bad about picking 1 sole distributor in a country that is 5000km wide (and on the far west coast!!) I'd want to play one before ordering from that far away, might as well be Florida at that point.

China has become the world's factory. We're screwed.
Now playing....Dr Who, Pinbot, Black Hole, Mars GOW, Star Race, Stargate, Alien Poker
Now fixing...Circus, Force II

Sparky
MAACA OG
Posts: 22951
Joined: Tue May 21, 2013 5:33 pm
Location: Saint-Lazare, west of MTL

Re: Thunderbirds Pinball Complete

Post by Sparky »

Homepin wrote:Hello Guys,

Thanks for the kind words of support. It has been a very challenging four years to make it to this point. I started this project from an empty factory space and now I'm pleased to be able to say we are starting to build our first pinball machines. I would like to add a few details about some comments made in this thread.

The staff member "painting" the DMD panel was in fact posing for the camera - he is spraying water only. Our workers ALWAYS don the correct protective gear for every part of the job they are doing. But, on the subject of paint, we ONLY use water based "green" paint for all painting of our products.

We have made licenced video game tables under the well known Australian brand, "Hankin" for the last three years and we most certainly do have a production line, it just wasn't shown in that promo video (see a pic below with game tables on the line). We will alternate between tables and pinballs as the demand dictates. We also have other machines in the pipeline and all of this compliments our extensive range of replacement pinball PCBs that we have made for nearly ten years now.

I'm pleased to announce that Nitro Pinball in Vancouver is the sole Homepin authorised agent for Canada and they will be stocking the full range of Homepin products from Thunderbirds pinball (RRP US$4995) to Hankin game tables and also the full range of our replacement pinball PCBs. Contact Tommy if you are interested in any of our products as the first shipment is selling fast and it hasn't left yet!

We are readying for our first small run of TAG and we have placed orders with outside vendors for the things that we don't make such as the custom made plywood and the clear 2mm ramps but we are being thwarted a little by Chinese New Year that is looming at the moment.

A note on workplace, heath and safety, the Chinese Government is cracking down very heavily in this area and also environmental protection areas. We are inspected at least once a week in the factory by some other Govt department from fire to insurance and on the list goes. Long gone are the days of workers being paid $10 a week and living in squalor. Two of my staff have recently bought new cars (and I drive a used Great Wall pickup LOL) and a third is taking driving lessons at the moment. China in 2018 is nothing like the China from even 10 years ago. Most cars on the street are new 7 series BMWs, Benz's and Audi's. It isn't a joke, I'm very serious.

Anyway, thanks again for your support and I look forward to visiting again later this year for "Flipout".


Image
Welcome to MAACA! And I must admit I am excited to see this pin and try one out. And it is cool to see the Hankin name in gaming once again!!

Who knows... first NIB? LOL
Patron saint of lost pinball causes.

Stage 5B. All except for NIB crap.

viewtopic.php?f=3&t=4742&p=40349&hilit=stages#p40349

User avatar
Homepin
MAACA Silent Type
Posts: 6
Joined: Fri Jan 19, 2018 7:09 am
Contact:

Re: Thunderbirds Pinball Complete

Post by Homepin »

uberhare wrote:Nice to see another brand out there producing machines, even if it is in China. Too bad about picking 1 sole distributor in a country that is 5000km wide (and on the far west coast!!) I'd want to play one before ordering from that far away, might as well be Florida at that point.

China has become the world's factory. We're screwed.
I understand your frustration but there are several factors at play. We can't spread ourselves too thin as a new player because I want to make 100% certain that wherever our products are sold we support them to our best ability. That requires having solid partners that we can trust and rely on. Second, finding distributors who are prepared to take a chance ON US!!! - it just isn't that simple.

Tommy took a punt, hopped on a 'plane and came to China specifically to visit the Homepin factory and see for himself if we were for real or not. It takes serious commitment for anyone to do that.

I understand about the size of Canada - I'm Australian and it's also very large. I'm certain Tommy will find a way to sort out the situation and I will be working with him to establish things in all parts of Canada.

Yes, the Homepin factory is physically in China for pretty obvious reasons BUT all management are Australian and Taiwanese and we not only know and understand pinball but we are also well aware of the "Made in China = CRAP" argument. Don't worry, we often say and think that in Australia as well. It's easily overlooked that China does produce some of the worlds best electronics but ONLY with the help and guidance of western companies and personnel.

We are also working on a new release pinball that will be the first Hankin pinball machine for 30 years - it is being designed by one of David Hankins' sons who is also an avid pinball player and ranks highly in the world scene as a player.
facebook.com/Homepin.Factory

uberhare
MAACA Half-ling
Posts: 611
Joined: Mon Mar 19, 2012 9:06 pm
Location: Stratford, Ontario

Re: Thunderbirds Pinball Complete

Post by uberhare »

China can product whatever quality you demand! I work for an automotive parts importer and seen both ends of it. Lots of good quality parts coming out of China now. OEMs are all producing parts there too. Anyone who thinks they are buying a "domestic" car these days to avoid foreign goods is delusional.

I'll tell ya straight up having your dealer that far away, people will order from the USA before Vancouver. Not going to happen, so you might as well choose one near Toronto or Montreal too.

Congrats on bringing another machine to market at a competitive price!
Now playing....Dr Who, Pinbot, Black Hole, Mars GOW, Star Race, Stargate, Alien Poker
Now fixing...Circus, Force II

User avatar
cap
MAACA Half-ling
Posts: 998
Joined: Wed Apr 05, 2017 8:19 pm
Location: Laval

Re: Thunderbirds Pinball Complete

Post by cap »

uberhare wrote:I'll tell ya straight up having your dealer that far away, people will order from the USA before Vancouver. Not going to happen, so you might as well choose one near Toronto or Montreal too.
I've got bad news for you. Mike repeatedly said the USA is not his market. Hence my question about a US distributor above.
This business decision makes sense to me if he wants to follow the same scale model as Spooky, but it rubbed many Americans the wrong way.
Road Show, Last Action Hero, Rocky & Bullwinkle, Stargate, F14 Tomcat (in restoration)

Post Reply

Return to “MAACA Forum and Chat”