*3D printed parts thread*

Restoration/upgrades/fixes/fabrication of pins and vids
User avatar
Mindstorm88
MAACA Mega Contributor
Posts: 1332
Joined: Sat Nov 21, 2009 9:41 am
Location: Sorel-Tracy, Qc
Has liked: 35 times
Been liked: 38 times

Re: Unobtanium plastic parts thread

Post by Mindstorm88 »

I have seen some custom parts created too !!!! :D 8-)

User avatar
Mrhide
MAACA OG
Posts: 12169
Joined: Fri Nov 20, 2009 6:59 pm
Location: Laval
Has liked: 412 times
Been liked: 252 times

Re: Unobtanium plastic parts thread

Post by Mrhide »

j'ai besoin d'imprimer des bebelles... mais c'est pour des videos. C'est tu ok ?!
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!

User avatar
R.A.B.
MAACA Mega Contributor
Posts: 3523
Joined: Sun Mar 27, 2011 8:17 pm
Location: Fluttering above the trees and the bushes on the Island of the Nones.
Been liked: 240 times
Contact:

Re: Unobtanium plastic parts thread

Post by R.A.B. »

We had printed Bally p/n P-7939-1 ( Nut & spring Bracket) for North Star's Dolly Parton when we were in a pinch. Worked great. Couldn't find it anywhere,then I found a bunch at Alouette after we printed it, so we have that file somewhere.

Regardless, I think this is a good thread Chnill, but if I can make the suggestion to use part numbers under the pics so there is less chance of an error. Believe me alot of parts look like what you may need in a picture, but without part numbers you can't be sure.

Hugs,

Rob
Last edited by R.A.B. on Mon Nov 25, 2019 9:03 am, edited 1 time in total.
http://www.montrealpinball.com
https://amusement.evolvo.com/

Bally 1936 "Bumper" - North Star 1949 "Sea Breeze" - North Star 1950 "Richelieu" - Universal 1950 "Feature Bell" - Gottlieb 1952 "Queen of Hearts" - Williams 1960 "Ten Spot" - Gottlieb 1971 "Challenger" - Williams 1973 "OXO" - Bally 1976 "Bonanza"

Maxed out at 10 machines, no more. Un max de 10 machines, pas plus.
Une règle suivi guéri de tout. A rule respected can cure anything.

A philosophy of doing shall rule until the days when I can no longer "do" arrive. Because when I am too old to adjust an AX relay or relieve a woman friend from sighing, there will only be memories to fill my time. So, the task at hand is to build that RRSP of memories in order to joyfully cushion the later stages of life.

Personally prefer the exceptional qualities lurking beneath any normal state of affairs. Alas, our day to day is being promoted as extraordinary via a world wide web largely fueled by the new dumb & followed closely by the latest breed of unscrupulous scoundrels & judas goats. So, god bless the fool hearted, the crazed, and the railroaded all in good measure for they will likely inherit what is left of the earth after the screwheads are done with it. God damn darwinian primates, why do they refuse to evolve, even after all we should have learned from being dumb savages for so long.

"I try my best to be just like I am, but everybody wants you, to be just like them. " - Zimmy

User avatar
HPR Pinball
MAACA OG
Posts: 7926
Joined: Thu Sep 16, 2010 4:53 pm
Location: St-Rose, Laval
Has liked: 14 times
Been liked: 108 times

Re: Unobtanium plastic parts thread

Post by HPR Pinball »

Best pinball thread for many years, i feel sometimes this hobby is dying. Thanks for this offer!
The video game i want to play is always the one i don't have :FP:
Les arcades, j'suis tombé d'dans quand j'tait pti !! :-)

User avatar
Splitskull
Admins
Posts: 3712
Joined: Thu Nov 19, 2009 5:59 pm
Location: Mascouche, Qc.
Has liked: 28 times
Been liked: 6 times

Re: Unobtanium plastic parts thread

Post by Splitskull »

I need some things for my telescope. To replace duct tape :)
What's the biggest surface you can print? Something about 5inch diameter ok? I think is 5inch or so.

This would be cool if you can print it.
https://www.thingiverse.com/thing:2487105

Let me know if you or Bruno can do it, and how much $ ?

Thanks

User avatar
redketchup
MAACA Mega Contributor
Posts: 4879
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 42 times
Been liked: 142 times
Contact:

Re: Unobtanium plastic parts thread

Post by redketchup »

Un cover pour la switch des classic stern... il y a deja un americain qui les fabrique, mais si on peut les faire locale, j'en prendrais 6!
Attachments
cover2.jpg
cover1.jpg
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
mrmikeman
MAACA Mega Contributor
Posts: 3208
Joined: Thu Nov 19, 2009 9:31 am
Location: Ottawa, ON
Has liked: 86 times
Been liked: 212 times

Re: Unobtanium plastic parts thread

Post by mrmikeman »

I'm willing to print some test stuff for anyone as long as you provide the file and pay for shipping. My printer is resin (DLP) so the print volume is a tad small. 115mm x 65mm x 155mm. But the resolution is awesome and you don't get print lines.

The resin has a shelf life of about 1 year and I am near that so free printing! :)

I can print clear (new 1 L bottle), and have a little bit of opaque gray left.

Cheers,
PINS:
Labyrinth (#21)
Jurassic Park LE (#449)
Cactus Canyon LE(#759) *FOR SALE - $13000
MultiMorphic P3 with all 7 current modules + all mini-games currently available
Star Wars Prem
Star Trek the Next Generation
Lady Luck (Recel) (in winter storage)
Gtb Pro Football (in winter storage)

Incoming: Jaws, Looney Tunes, Princess Bride (P3 module)

VIDS:
Vewlix S 2-player: Running Emu PC *FOR SALE - $3000

MISC:
Aristocrat Shuffle Alley (in winter storage)
Custom built mini Virtual Pinball

JUKES
Seeburg STD2 Entertainer - Converted to MP3 while retaining the original look and feel. *FOR SALE - $500 (in winter storage)
NSM Emerald Ice CD(100) wall hanger juke. *FOR SALE - $1400

Gone but not forgotten
So many... WOZ ECLE, Stern POTC, Star Trek Pro, MMrRE, Stranger Things LE, Dr Who, RFM, SWEP1, Road Show, Monster Bash, Twilight Zone, Lord of the Rings, Simpsons Pinball Party, Demolition Man, Terminator 2, Funhouse, Tales from the Crypt, High Speed, Bad Cats, Flintstones, WWF Royal Rumble, Laser War, Laser Ball, Silver Slugger, Batman Forever, Pinbot, 6 Million Dollar Man, Galaxy, Meteor, Countdown, Hot Tip(SS), and others I just can't think of lol.

User avatar
mrmikeman
MAACA Mega Contributor
Posts: 3208
Joined: Thu Nov 19, 2009 9:31 am
Location: Ottawa, ON
Has liked: 86 times
Been liked: 212 times

Re: Unobtanium plastic parts thread

Post by mrmikeman »

Here’s some examplesnof stuff I printed for shits and giggles.
Attachments
DE602F89-9347-4D9E-BC4A-78663444D18B.jpeg
818F293B-01EB-4044-BFCD-60916EBDDE71.jpeg
5E96A94C-2CFF-47A8-8E60-967D00F44E73.jpeg
PINS:
Labyrinth (#21)
Jurassic Park LE (#449)
Cactus Canyon LE(#759) *FOR SALE - $13000
MultiMorphic P3 with all 7 current modules + all mini-games currently available
Star Wars Prem
Star Trek the Next Generation
Lady Luck (Recel) (in winter storage)
Gtb Pro Football (in winter storage)

Incoming: Jaws, Looney Tunes, Princess Bride (P3 module)

VIDS:
Vewlix S 2-player: Running Emu PC *FOR SALE - $3000

MISC:
Aristocrat Shuffle Alley (in winter storage)
Custom built mini Virtual Pinball

JUKES
Seeburg STD2 Entertainer - Converted to MP3 while retaining the original look and feel. *FOR SALE - $500 (in winter storage)
NSM Emerald Ice CD(100) wall hanger juke. *FOR SALE - $1400

Gone but not forgotten
So many... WOZ ECLE, Stern POTC, Star Trek Pro, MMrRE, Stranger Things LE, Dr Who, RFM, SWEP1, Road Show, Monster Bash, Twilight Zone, Lord of the Rings, Simpsons Pinball Party, Demolition Man, Terminator 2, Funhouse, Tales from the Crypt, High Speed, Bad Cats, Flintstones, WWF Royal Rumble, Laser War, Laser Ball, Silver Slugger, Batman Forever, Pinbot, 6 Million Dollar Man, Galaxy, Meteor, Countdown, Hot Tip(SS), and others I just can't think of lol.

User avatar
redketchup
MAACA Mega Contributor
Posts: 4879
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 42 times
Been liked: 142 times
Contact:

Re: Unobtanium plastic parts thread

Post by redketchup »

Chnillapoil wrote:
redketchup wrote:Un cover pour la switch des classic stern... il y a deja un americain qui les fabrique, mais si on peut les faire locale, j'en prendrais 6!
Fafa...apporte un exemplaire si tu vas au Timeout
C'est ça le problème... je n'ai pas d'exemplaire...
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
redketchup
MAACA Mega Contributor
Posts: 4879
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 42 times
Been liked: 142 times
Contact:

Re: Unobtanium plastic parts thread

Post by redketchup »

Chnillapoil wrote:As-tu quelques mesures? Entre les vis ?la hauteur?
oui, je te reviens avec ca ce soir
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
Toeckeder
MAACA Mega Contributor
Posts: 1515
Joined: Thu Sep 16, 2010 11:58 am
Location: Blainville, Quebec
Has liked: 24 times
Been liked: 38 times

Re: Unobtanium plastic parts thread

Post by Toeckeder »

Challenge
Attachments
2019-11-26_20-10-01.jpg
Pins: HIGH SPEED, GUNS N ROSES, FIREPOWER, SORCERER, LASER WAR, FATHOM, NOW, BLACKOUT, ALIEN POKER, LASER BALL, TOMMY, FIREPOWER II, BALLY PLAYBOY, RUSH LE, RIVERBOAT GAMBLER
WTB: NO Vacancy
Vid: MAME #1, TEMPEST, NUCLEUS CANNON, MAME #2, NAMCO Reunion Class of '81
Gone: Punch-Out!!, TARGET ALPHA, STARGATE, SPIRIT OF 76, ROLLERGAMES, TAXI, TOMMY, EARTHSHAKER, BACK TO THE FUTURE, TWILIGHT ZONE, TX SECTOR, CENTAUR, AC/DC PRO, ROLLERGAMES, WHIRLWIND, TIME MACHINE, GALAGA, GRAND LIZARD, TORPEDO ALLEY, F-14 TOMCAT, BLACKOUT, ALGAR, FIREPOWER II, ABRACADABRA, EIGHT BALL DELUXE LE

pinball wizard
MAACA Valued Contributor
Posts: 137
Joined: Wed Oct 13, 2010 6:51 pm
Location: laval

Re: Unobtanium plastic parts thread

Post by pinball wizard »

Chnillapoil wrote:Here's something we've designed Mindstorm and I for our respective Pinbot's:
pinbot baffle.jpgpinbot baffle3.jpgpinbot baffle2.jpg
HEY ca tu fait une grosse difference ? si oui p.e que ca serait le fun j ai une pinbot aussi .. :)

Guard
MAACA Super Contributor
Posts: 584
Joined: Sun Jun 04, 2017 1:23 am
Location: Guelph
Has liked: 81 times
Been liked: 68 times

Re: Unobtanium plastic parts thread

Post by Guard »

Though my cardboard is in great shape I'm going to watch this challenge.
PINS- Hit The Deck/ Tee'd Off/ Flash Gordon/Bluenote / Stern POTC/ DE Star Wars/ Big Hit/ Algar/Asteroid Annie and the Alians/Slugfest/Batman The Dark Knight/DE The Simpsons/Dirty Harry/T2/ Devils Dare/ World Poker Tour/Swords of Fury/ Lethal Weapon/Ripleys BION/Circa 1933/Striker Xtreme

RIP- Sinbad/ Supersonic

User avatar
Mindstorm88
MAACA Mega Contributor
Posts: 1332
Joined: Sat Nov 21, 2009 9:41 am
Location: Sorel-Tracy, Qc
Has liked: 35 times
Been liked: 38 times

Re: Unobtanium plastic parts thread

Post by Mindstorm88 »

Sometimes parts are available, but i need 1 tonight , so print one.
Attachments
20191204_160659.jpg
20191204_160647.jpg

User avatar
Mrhide
MAACA OG
Posts: 12169
Joined: Fri Nov 20, 2009 6:59 pm
Location: Laval
Has liked: 412 times
Been liked: 252 times

Re: Unobtanium plastic parts thread

Post by Mrhide »

Merci Chenille! :D
IMG_1253.jpg
IMG_1262.jpg
IMG_1263.jpg
IMG_1264.jpg
IMG_1265.jpg
IMG_1268.jpg
LF: GrooveCoaster Machine, shmups or any PCB, specifically Namco System 1 (Pacmania), let me know what you have!

User avatar
Mindstorm88
MAACA Mega Contributor
Posts: 1332
Joined: Sat Nov 21, 2009 9:41 am
Location: Sorel-Tracy, Qc
Has liked: 35 times
Been liked: 38 times

Re: Unobtanium plastic parts thread

Post by Mindstorm88 »

Chnillapoil wrote:
Mrhide wrote:Merci Chenille! :D
Coooolllll !!!!!
Belle job mon chum!!!

User avatar
redketchup
MAACA Mega Contributor
Posts: 4879
Joined: Thu Nov 19, 2009 12:15 am
Location: Laval,Qc
Has liked: 42 times
Been liked: 142 times
Contact:

Re: Unobtanium plastic parts thread

Post by redketchup »

Oh yeah!
Bally Centaur, Fathom, Stern Big Game, Flight 2000, Quicksilver, Catacomb, Stargazer, Nineball, Metallica Pro, Iron Maiden Pro, Wurlitzer 41, 700, 750e, 1100, 1900, 1700, Rockola 1428, tempo 1, seeburg HF 100R, VL 200, Ami I
To see it: http://www.pinballowners.com/redketchup

User avatar
Mindstorm88
MAACA Mega Contributor
Posts: 1332
Joined: Sat Nov 21, 2009 9:41 am
Location: Sorel-Tracy, Qc
Has liked: 35 times
Been liked: 38 times

Re: Unobtanium plastic parts thread

Post by Mindstorm88 »

A friend told me that this part for a Data East Simpson is impossible to get these days, so , why not print :D
Attachments
20191211_231053.jpg
20191211_231046.jpg

User avatar
Lowrent
MAACA Super Contributor
Posts: 858
Joined: Mon Apr 23, 2012 2:06 pm
Location: Saint-Lambert
Been liked: 3 times

Re: Unobtanium plastic parts thread

Post by Lowrent »

J'adore cette thread...

User avatar
darkdog1
MAACA Super Contributor
Posts: 533
Joined: Sun Jul 07, 2013 7:33 am
Location: terrebonne
Been liked: 2 times

Re: Unobtanium plastic parts thread

Post by darkdog1 »

C'est "ca coche" tes projets d'imprimante Alain!
"All in "pour le hobby!
Lâche pas!
Rien ne sert d'argumenter avec un stupide,car pour le faire tu dois descendre a son niveau et la..il te battra par expérience!

User avatar
eh97ac
MAACA Super Contributor
Posts: 550
Joined: Sun Dec 05, 2010 11:41 am
Location: Milton
Has liked: 11 times
Been liked: 5 times

Re: Unobtanium plastic parts thread

Post by eh97ac »

I can never save all the bell posts when removing them from metal.

Here is what I am talking about, pic from HPR's F2K thread
Image

User avatar
eh97ac
MAACA Super Contributor
Posts: 550
Joined: Sun Dec 05, 2010 11:41 am
Location: Milton
Has liked: 11 times
Been liked: 5 times

Re: Unobtanium plastic parts thread

Post by eh97ac »

Chnillapoil wrote:
eh97ac wrote:I can never save all the bell posts when removing them from metal.

Here is what I am talking about, pic from HPR's F2K thread
Image
Ok but what are you looking for exactly?
6 bell posts in red, orange or black

User avatar
eh97ac
MAACA Super Contributor
Posts: 550
Joined: Sun Dec 05, 2010 11:41 am
Location: Milton
Has liked: 11 times
Been liked: 5 times

Re: Unobtanium plastic parts thread

Post by eh97ac »

https://www.marcospecialties.com/pinball-parts/20A-8926

20A-8926 standoff 3/8" diameter x .675" tall version

User avatar
eh97ac
MAACA Super Contributor
Posts: 550
Joined: Sun Dec 05, 2010 11:41 am
Location: Milton
Has liked: 11 times
Been liked: 5 times

Re: Unobtanium plastic parts thread

Post by eh97ac »

SEXY!

User avatar
necro_nemesis
MAACA OG
Posts: 8668
Joined: Wed Nov 18, 2009 10:32 pm
Location: Within mechanism_8 or simply Newmarket
Has liked: 12 times
Been liked: 26 times

Re: Unobtanium plastic parts thread

Post by necro_nemesis »

A bit of custom 3d work.
Attachments
image1[3170].jpeg
image2[3170].jpeg
image1[3169].jpeg
Pins: Scared Stiff - Getaway - Funhouse - Twilightzone - No Fear - Attack from Mars - Indiana Jones - Cirqus Voltaire (prototype) - Medieval Madness - Tales of Arabian Nights. Arcades: Robotron (cocktail) - Stargate - Midway Haunted House. Jukes: Seeburg 100c - Seeburg 222.
Rumors of my demise have been greatly exaggerated.

Post Reply