WTB: Classic Bally neck vent grille, 50mm x 247mm

Wanted Pinball Parts only Please
Post Reply
User avatar
semicolin
MAACA Mega Contributor
Posts: 1186
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Has liked: 172 times
Been liked: 225 times
Contact:

WTB: Classic Bally neck vent grille, 50mm x 247mm

Post by semicolin »

Hi! Do you have one of these? P-2754-y? There are three variants: One is 5cm tall and the other is 6cm. I need the 5cm one for a standard width table, 247mm.

Nobody seems to have them in stock and the only reproducer is in Germany and does not easily ship to Canada.

If you have a busted old cabinet or parts of one lying around, I'm looking for this piece. I'm not scared of rust.

Thanks!
bally-lueftungsgitter-em-ee.png

User avatar
zebulon
MAACA New Contributor
Posts: 27
Joined: Wed Oct 10, 2012 1:41 pm
Location: Whitby, ON
Been liked: 5 times

Re: WTB: Classic Bally neck vent grille, 50mm x 247mm

Post by zebulon »

You can buy the metal and bend a new one up easy enough, Home Depot or MetalSupermarkets.com can set you up with a piece.

User avatar
semicolin
MAACA Mega Contributor
Posts: 1186
Joined: Sun Apr 17, 2016 4:32 pm
Location: Ottawa, ON
Has liked: 172 times
Been liked: 225 times
Contact:

Re: WTB: Classic Bally neck vent grille, 50mm x 247mm

Post by semicolin »

I don’t own a brake but I know too many tinbangers to do a crap job of it.

No worries, I got in touch with the folks at avo-pinball and worked out international shipping.

Post Reply